I have a natural gas unit that I want to run on propane. It's a model QT02516 25KW from 2008
SOURCE: converting a pitco frialator from natural gas to propane
you need to change the pressure regulator,burner orfices and possibly the gas valve.goto northernparts.com and type in the model of the fryer for propane
SOURCE: my standby generator is just cranking but wont turn all the way
If it was installed only five months ago, it should still be under warranty. Call Home Depot and have them send out a repair person.
SOURCE: The generator starts up runs for about 15 seconds and shuts down.
Check the oil pressure switch
If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c
SOURCE: Recently a Generac 17kw natural gas generator was
There will be a normal odor as the engine cranks until enough gas is in the intake for starting. Gas generators do not have an ignition 'on-off' switch, they use a fuel solenoid to turn on and off the gas to start and kill the engine. If you are uneasy, your local gas company should be able to check engine compartment for leaks. Here in my home town, the gas company will inspect any equipment for gas leaks and/or carbon monoxide levels free of charge.
I’m happy to assist further over the phone at https://www.6ya.com/expert/rolandw_c013176d62ee17ae
Testimonial: "Tks for the feedback on this problem, it is very informative. The faint gas odor persists when idle. Would this suggest a defective solenoid."
235 views
Usually answered in minutes!
×