Can you use 3 in one oil on Dremel - Dremel Tools & Hardware - Others

Question edited for clarity to add Maker.
Question moved to Make Model category.

The lock button should lock the shaft. With the collet facing you, turn anti-clockwise with grips or pliers. They should never be done up _that_ tight. Try spraying with penetrating oil. Two version of the manual below.

DREMEL OF Multi 395

https://docs.rs-online.com > ...
PDF
the better products of its kind. • To get the optimum benefit from the tool we advise you to read this instruction manual thoroughly.

DREMEL Moto-Tool Owner's Manual

https://neurophysics.ucsd.edu > Manuals > Dremel
PDF
DREMEL. Moto-Tool Owner's Manual. Models 275, 285, 395, and 595. 3. HONESTLY NOW... Have you read this. OWNER'S MANUAL? This manual will tell you how to get ...
11 pages

https://all-guidesbox.com/model/dremel/850.html

https://www.dremel.com/en_US/support/manuals


https://www.dremel.com/en_US/support/manuals/other-tools

spray lube or oil and use pliers to move it back and forth

tells in the instruction booklet that came with it.

try light sewing machine oil.

I agree with raysaw - sounds like a job for WD40.

• page 15 Squirt a generous amount of SAE 20 oil around the shaft end and bronze bearing
  
• Dremel 1830 Manuals

Dremel 1830 Manuals

with tool unplugged rotate tool end with your finger tips if it gives any resistance to this your bearings have forign material in them (happens if your doing grinding allot) if a liberal dose of light oil (sewing machine) does not improve this friction im sorry but you;ll have to replace tool to run slower speeds

Lubrication

ARM BEARINGS

Lubricate the arm bearings with oil after 10 hours of use.

Re-oil after every 50 hours of use or whenever there is a

squeak coming from the bearings.

TO LUBRICATE

1. Turn saw on its side (Fig. 18).

2. Remove rubber plug to expose bronze bearing.

3. Squirt a generous amount of SAE 20 oil around the shaft

end and bronze bearing.

4. Let the oil soak in overnight in this condition.

5. Next day repeat the above procedure for the opposite
side of the saw.



You can get the manual on the link below. scrool down to product details to get it.

http://www.amazon.com/Dremel-1680-6-Horsepower-Benchtop-Variable/dp/B0000302YQ

Good Luck

Try soaking is diesel fuel instead.