- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
DADF Communication Fail Transmission cannot be established between the ESS/MCU PWB and the DADF PWB.
Remedy
1. Turn the power OFF and ON. 2. Turn OFF the power and check the connections between the ESS/MCU PWB J421 and the DADF PWB J751, J752 for open circuits, short circuits, and poor contacts. 3. If no problem is found, replace the following parts in sequence: • DADF PWB (PL 56.2) • ESS/MCU PWB (PL 18.1)
50.21 error is a "cyan scanning error" Manual says to replace the DC Controller. Get a tech to check it out, and if you want to get the printer printing again, listen to him.
Waiting means you locked it up by using the wrong code too many times if there is a number after waiting 2= 5 minutes 3=1 hour 4=24 hour That is how long you have to wait until you can try again.
×