How do I set time on a casio illuminator watch that has 1 mode button and 1 12/24 hr settings on left hand side of watch?

All you have to do is to set the digital time.After pressing the upper left button for 2-3 seconds the display digits start to flash.By pressing lower left button (MODE) once at a time and by using the left side buttons, you can set the right time,date etc.When finished press upper left button again to complete setting.Automatically the hour and minute hands will be set to the correct time following the digital time.

dear please

Looking at your watch face: the upper left button is A, upper right is B, lower left is C and lower right is D.

Get your watch into "Hand Setting mode" That is the mode witht he digital time and seconds above it.
From Day and Date window it would mean pushing button "C" six times to get to that mode.

Once in "Hand Setting Mode"
Hold down button "A" til time blinks, then press button "D" to advance the hands, to the desired time.

Press "A" to exit mode. Press "C" to return to timekeeping mode.

Hi,you need to look at the user manual..
just in case ,if you need soft version of the user manual pls visit the URL below..

Hope this helps! Take care and please Remember to rate/vote and give me
4 Thumbs Up for me to continue for Helping out the Community :)
Thanks
***************************
CASIO Watch User Manual Archives

http://world.casio.com/wat/download/en/manual/
Use this page to download a copy of CASIO watch manuals in PDF format.
To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

Go into settings.

Press the center button on the right hand side of the watch 1 time you will see settings watch time & date appear in the display.

Press the bottom button on the right side of the watch1 time to get into the TRAINING SETTINGS FUNCTION.

When you see TRAINING SETTINGS in the display press the center button on the right side of the watch once.

You are in TRAINING SETTING mode.

Press the bottm button on the right hand side of the watch 3 times until you see
ZONE LIMITS displayed.

When you see ZONE LIMITS displayed press the center button on the right side of the watch 1 time to enter into the ZONE LIMITS FUNCTION.

Now, you should see the lower end heart rate limit number blinking.

To adjust this number use the top button on the right hand side of the watch to increase this limit or lower button on the right hand side to decrese it.

When you have it set where you want it press the center button 1 time to save that setting.

Now you should see the upper limit number blinking.

Follow the same steps to set the upper heart rate limit.

When you have pressed the ceter button to set the upper limit you have completed setting the heart rates limits and the display should read: LIMITS SET!

http://ftp.casio.co.jp/pub/world_manual/wat/en/qw2747.pdf

A - upper left button
B - upper right button
C - down left button
D - down right button
In the Timekeeping mode, Precc C six times to enter to Hand Mode
Hold A until the current digital time start
Hold D to advance the analog time
If you like advance the analog time a long away, press D + B the same time. Press A to exit the setting screen.
To return to the Timekeeping mode press C

Here is how you do it:

Looking at your watch face: the upper left button is A, upper right is B, lower left is C and lower right is D.

Get your watch into "Hand Setting mode" That is the mode witht he digital time and seconds above it.
From Day and Date window it would mean pushing button "C" six times to get to that mode.

Once in "Hand Setting Mode"
Hold down button "A" til time blinks, then press button "D" to advance the hands, to the desired time.

Press "A" to exit mode.

Press "C" to return to timekeeping mode.

1. Press the Bottom Left side button until you reach time keeping mode.
2. Press the Bottom Left side button 6 times to reach hand setting mode.
   
3. Hold down the Top Left side button until the digital time starts to flash.
4. Press the Bottom Right side button to advance the analog time by 20 seconds; Holding the button down will advance the time faster. Pressing both of the Right side buttons will lock the time into advancing quickly without holding buttons down; this will continue until you press a button or the clock advances 12 hours.
5. Press the Top Left side button to exit the settings screen.
6. Press the Bottom Left side button to return to timekeeping mode.
   

Not a direct solution but you can get the electronic manual for free from http://world.casio.com/wat/download/en/manual/

Here is how you do it:

Looking at your watch face: the upper left button is A, upper right is B, lower left is C and lower right is D.

Get your watch into "Hand Setting mode" That is the mode witht he digital time and seconds above it.
From Day and Date window it would mean pushing button "C" six times to get to that mode.

Once in "Hand Setting Mode"
Hold down button "A" til time blinks, then press button "D" to advance the hands, to the desired time.

Press "A" to exit mode.

Press "C" to return to timekeeping mode.

Go to this link and with the four digit module code from the back of the watch you should be able to get a manual; http://world.casio.com/wat/download/en/manual/ Hope this helps :)