Would like to change white color to black or stainless

Yes you can replace the panels. There are 3 panels. The problem is only 2 of the 3 panels are availble. The large panel can be found here:

http://www.appliancepartspros.com/part_details.aspx?part_id=4508020 or here:

http://www.searspartsdirect.com/partsdirect/part-model/Kitchenaid-Parts/Dishwasher-Parts/Model-KUDS25SHBS1/0593/0130000/P9080030/00001?blt=06&prst=&shdMod=
The panel below that panel is no longer available so you would end up with a large stainless panel and a white panel below that.

I checked several sources for the panels. All 4 of the sources that I checked state the panel (item 5 of above link) is not available.

Also the bottom toe panel is black (Item 8 above link) on the stainless model. You could sand and paint your existing one (enamel) black.

Thanks for choosing FixYa,
Kelly

YES THIS IS POSSIBLE IF YOU ENTER YOUR FULL MODEL NUMBER ( YOU ARE MISSING SOME OF THE NUMBER) ON THE SEARS SITE THE ILLISTRATED PARTS BREAK DOWN WILL GIVE YOU CHOICES OF COLOR.
http://www.searspartsdirect.com

yes / when changing to ss from white . most people wasnt the black control panel . as it looks best . the cost of the panel and stainless . is costley . and inless dw is newer model . most would look at the cost of a new one .. hple this helps mm

I am unsure about the window part but I know of a site that sells covers for your ovens. While their site does not have the pictures of the oven doors available yet-- all their options are available for oven doors. They can help change your black existing oven door to white. I do not believe they can help you with the window---
Check them out www.applianceart.com

yes but you would be better of removing panel and taking it to your nearest powdercoater may be cheaper cheers

Black, white and bisque seem to be the only colors available for the double convection oven. Might be possible to find the cooktop, but it's hard to know for sure without the model number.

In my experience, it's often not economical to switch to stainless steel as stainless steel panels can be extremely expensive (I've seen a freezer door on a side by side fridge sell for over $850... Just the freezer door!)

When I searched the parts list for your dishwasher, I only found the door panel available in white but call the manufacturer and ask them because I believe you may be able to change to stainless.

Yes!!! Go to www.applianceart.com, they have white, stainless, and a ton of other options.

It is possible but usually costs more than the oven is worth. Call Marcone appliance parts in St. Louis for pricing.

Okay here we go. The SHU43C05UC/17 is the stainless model. The parts needed to change over to SS are 1) 431828 SS Facia cost 72.80. 1) 417981 power switch button 15.40. 1) 426062 program buttons set 5.40. 1) 214750 SS outer door panel 101.50. 1) 426063 lid (fits inside the handle area) 3.90. As you see it will not be cheap to change over to a SS dw. These prices are from Bosch's Quick Finder website. Hope this helps.