Old green riccar sewing machine & table. I have no idea about it. If u could tell me about it it would be great. Didn't see date anywhere On front says model #15,on motor model #25 Also has #JA3485195

Looking at the pictures, I would say, "No."

Riccar 808e sewing machine

Spinninglizzy Weblog

Even if the table would fit both free arms, it is likely the attachment mechanisms are different.
...

I looked at Riccar's site and didn't see that model number. Please feel free to check
http://www.riccar.com/help/manuals/

Otherwise contact Riccar and see if they can send you one.

Hi you can download free manuals from the Riccar site.
I think this is the one you need:
http://www.riccar.com/ftp/whitepapers/2910-Owners-Manual.pdf
Hope this helps!

Manuals are available on the Riccar site.
http://www.riccar.com/help/manuals/
Have a look at a few to see if any are similar to your machine. There are quite a few but I'm afraid but that's the only way I can think of doing it without seeing a picture of the machine.
Most machine have the model number written on them somewhere, but that doesn't sound like the case here.
Hopefully your manual will be able to tell you which settings are correct for your machine in able for it to sew properly.
Hope this helps!

Here's a manual for the Riccar 1010, it should be similar.
http://www.riccar.com/ftp/whitepapers/1010-Owners-Manual.pdf
If not try looking dfore manuals on the Riccar website at www.riccar.com/help/manuals
Hope this helps!

Here's a manual for the 551, it should be similar enough for your machine.
http://www.riccar.com/ftp/whitepapers/551-Owners-Manual.pdf
If not look on www.riccar.com/help/manuals for a similar model.
Find out what shank your machine is and you should be able to buy parts for it. I find ebay great for old sewing machine parts.
Hope this helps!

Hi
Our YM-170C-A motor is similarly not working. Can you tell us if you fiound a way of sorting the problem please or likely supplier of replacement motor perhaps? A direct email would be great please.
Many thanks
John Norfolk
[email protected]

Hi Evelyn,
I too have an J-C34 Riccar sewing machine. It was my grandmother's. I'm looking for a copy of the owner's manual. Do you have one?

I have a Riccar 210B sewing machine. It is about 37 years old. I have been the only owner and up to yesterday it was working fine. Today the motor seems to have quit.

Is the motor repairable? The tag on the motor says YM-40 80W 115V.

Thank you, Susan in Kailua-Kona HI

I don't know if this will help or not, but here is a website where you can download a manual for any of the Riccar products: http://www.riccar.com/help/manuals/