Code f-24 is flashin on my washer

Here is a link to the owner's manual for that device.

http://www.searspartsdirect.com/partsdirect/user-manuals/mhwz600tw01-maytag-residential+washer-manual

The following list of codes indicates an electronics communication problem with the washer: * Epic® washer - F05, F07, F09, F10, F11, F13, F14, F15, F21, F22, and FdU
* Epic ZTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33


To remove the error display, press Pause/Off or Pause/Cancel twice.



If Pause/Off or Pause/Cancel does not work:

1. Unplug washer or disconnect power for one minute.
2. Plug in washer or reconnect power.
3. Re-select the cycle and press Start.

NOTE: If the error remains on the display, call for service.

Hope this helps.

Hello the error code F with a DL is usually a clogged or kink in the drain line.
Unplug washer and remove drain hose and clean it out.

Check area where Line connects to washer closley for any debris and remove it.

my epic will start & wash & then gets F 20 & won't drain until I hit start again

You need to use the HE detergent. I believe that is a drain problem. By using the regular detergent that causes more suds and in turn clogs your drain

ths.gardenweb.com/forums/load/.../msg1012004912002.html

I have a maytag epic z dryer and it wont turn on. it worked fine the last load, now nothing? help.

The "F" code indicates an electrical problem, possibly a faulting part. Maytag does not offer any guidance on this. FYI - Could be a bad control board

i also have a magtag epic z &f 24 error code is on my washer. i don't know what to do.

I need a clear code for maytag epic z front load washer
code f-o1 is coming up
says intall new ccu, I did but still the same
do I need to clear the code if so how.
please tell me.