Measuring Tools & Sensors Logo

Related Topics:

A
Anonymous Posted on Mar 17, 2015

Outdoor temperature reading shows -40 with wind chill -62. Outdoor temp is in fact +45.

1 Answer

AcuRite

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 20 Answers
  • Posted on Mar 17, 2015
AcuRite
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Sep 11, 2012
Answers
20
Questions
0
Helped
17595
Points
46

We would recommend a hard reset of your Weather Station. Please verify that you are using a good-quality, standard alkaline battery such as Energizer or Rayovac, and then follow the steps below.

1. Bring both the sensor and display unit indoors and remove at least one battery from each.
2. Make sure the A-B-C switch on both units match. Sometimes changing to a different channel can help.
3. Reinstall the battery in the outdoor sensor.
4. Reinstall battery into the display unit.
5. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection.

If you need any further assistance, please contact AcuRite Customer Support at 1-877-221-1252 or [email protected].

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My indoor receiver no longer receiving outdoor temperature reading.

Have you changed the batteries in the outdoor temperature sensor?
1helpful
1answer

Replace all betteries but no wind chill or outdoor temp shows

Batteries, both car and portable are affected by the temperature. Gently warm or replace as necessary.
0helpful
1answer

Won't show outside temperature or wind speed

Have you changed the batteries in the outdoor temperature sensor?
0helpful
2answers

Outdoor thermometer reads -40 so the climate control system blows heat in the summer

sound like faulty out side air temperature sensor located center radiator support.
0helpful
1answer

Medion md41199 atomic clock, cannot get the outdoor temp to show, how to fix please

Remove ALL batteries in transmitter AND clock.
Insert new batteries in outdoor transmitter.
Insert new batteries in the (receiver) clock.
Wait until outdoor temperature is received AND displayed on clock BEFORE setting time/date/etc.
1helpful
1answer

Water only runs with humidistat in test/reset mode. Aprilaire 600 with an Aprilaire 56 Automatic Humidistat, both about 5 years old. Water line is clear, and test mode runs fine for the 1 minute interval....

you need to make sure your humidity level in the house isnt higher then what your humidifier will provide at any givin outdoor temp. this chart is in the owners manual. you cant remove the wires going to the ODS or it will give an error unless you have a resistor to put in its place. Anyway if the humidifier works in test mode according to AA it works so you may have higher humidity than you think, the highest your gonna get is 45% as the temp outside drops it will allow less humidity so it doesnt cause window condinsation (property damage) here is a copy of the chart. the #s on the left are the dial setting
TABLE 2 – % Relative Humidity Guide
Outdoor Temperature (°F)
-10°F 0°F 10°F 20°F 30°F 40°F
1
10% 10% 10% 15% 20% 25%
2 10% 10% 15% 20% 25% 30%
3 10% 15% 20% 25% 30% 35%
4 15% 20% 25% 30% 35% 40%
5 20% 25% 30% 35% 40% 45%
6 25% 30% 35% 40% 45% 45%
7 30% 35% 40% 45% 45% 45%
1helpful
2answers

3M Precision Digital Atomic Wall / Desk Clock with Indoor & Outdoor Temperature and Alarm will not display outdoor temp, i have replaced batteries, outdoor sensor is transmitting, does not appear to...

After replacing the transmitter batteries several times, I tried replacing the clock batteries. They must have been getting low. Once I put in new batteries in the clock it worked fine. Good Luck.
Not finding what you are looking for?

611 views

Ask a Question

Usually answered in minutes!

Top Chaney Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66973 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39391 Answers

Are you a Chaney Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...