Chaney Measuring Tools & Sensors - Recent Questions, Troubleshooting & Support

Atomic clock should change automatically.

change from 24 hour setting to 12 hour setting

We would recommend a hard reset of your Weather Station. Please verify that you are using a good-quality, standard alkaline battery such as Energizer or Rayovac, and then follow the steps below. 1. Bring both the sensor and display unit indoors and remove at least one battery from each. 2. Make sure the A-B-C switch on both units match. Sometimes changing to a different channel can help. 3. Reinstall the battery in the outdoor sensor. 4. Reinstall battery into the display unit. 5. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection. If you need any further assistance, please contact AcuRite Customer Support at 1-877-221-1252 or [email protected].

press

Same exact features, buttons and functions as this manual by Irwin.

http://www.irwin.com/uploads/documents/36_laser_tape_25.pdf

I want to use an old sensor forgiven during 30 years. I have no more manual, off course. Thanks for your answer

Most moisture meters measure the moisture content of wood or concrete is measured in percentages. So if the reading says 15 that means that there is a content of 15% moisture in the concrete.

Pressing the - (minus) button on the back toggles temperature units. Pressing + (plus) toggles barometric pressure units.