Hi, So first I should say that I don't have the remote to the tv. So I first hooked the tv up to a basic cable antenna and it automatically tuned the channels. But in doing so it cut out certain channels. For example it goes from channel 2 to 4 and then to 5 and then 7. So now once I have a cable box hooked up to it, which needs it to be on channel 3, I can't get it to go on to channel 3!
If your are using a cable box,all of your channels will be control only on the cable box.so, what you are going to do is use the remote control of the cable box.
393 views
Usually answered in minutes!
Thanks for getting back so quickly! The only other question I found searching for this was asked in March '06 and still wasn't answered! But I tried using the cable remote, setting it to tv, and the tv doesn't respond. Bought a phillips universal remote and that didn't work either. Tried to play around with the cable remote to change the channel that it plays on the tv, but couldn't do that either. The tv actually has 2 av inputs but when the cable guy tried it, the usual av-in cables didn't fit. In the end in my desperation I tried to fiddle around with it and actually I was able to muscle it in there and it worked! So now the cable comes in through the "line" input. So that was one way around the problem! Thanks.
×