Proliant dl 380 server i cant access bios - HP Compaq ProLiant DL380 G4 Server

SOURCE: Boot problem with a ProLiant DL 380 server,

when you start your pc at that time press del button continuosly so you will in the setup dep there you can change your bootable settings otherwise set it as default setting

Miguel Espinoza

• 106 Answers
• Posted on Aug 19, 2010

SOURCE: how does one access the

please access the bios by pressing
f10 during post

SOURCE: I have HP PROLIANT DL

need to provide moreinfo.
is the server (prolaint DL380) constantly rebooting within BIOS mode or has it got to the stage of running windows.
The other item not mentioned here, is, IF the raid controller has failed, you will not see any disks initializing and would cause the system to continually reboot.
If it is an internal raid controller, it is part of the motherboard, you will need to contact HP to have it replaced.

If an pci related array controller .. i.e. separate to the motherboard, this will need to be replaced to see the HDD's.
Either way sounds like a hardware issue. Best to liaise directly with vendor to have the faulty components replaced.

Nouveau IT, LLC

• 596 Answers
• Posted on Nov 10, 2011

SOURCE: How do you access the BIOS in a Proliant ML350 G3 server?

Hello,

When you boot up your system, press F9 when prompt. It will apper usually at the top right of your monitor.

Good Luck.
C2Solutions

SOURCE: hp proliant dl 180 g5 cooling fan issues fan given noise

I would power the server off. Blow it out with a can of air. Power it back up.. If it is still making a noise, you need to replace the fan.