Everio is not transferring videofiles to pc

Video Transfer * Install the Software that came with the camera to your PC.
* Connect the camera to the PC with the USB cable. 1. Open the LCD monitor to turn on the camera.
2. On the camera, Select [PLAYBACK ON PC]
Although a dialog box appears on the PC, you do not need to use it. PowerCinema Starts Automatically.
3. Click [Browse Videos] (for video playback) or [Browse Pictures] (for still image playback).
4. Click the media that contains the desired files.
5. Click the desired file.
If you click Sort by/Filter by/View by, Searching options are delayed. Use them to search a file quickly. *Sort by:
The order of files is rearranged according to item that you selected.
*Filter by:
Files are filtered according to the item that you selected.
*View by:
you can change the number of thumbnails on the screen.

Connecting Everio to PC behaves like as you are connecting an external HDD to your PC. You can just transfer files from you Everio(SD Video folder for videos,DCIM for photos) files with extension .TOD or .MOD sometimes can't be open depending on you pc.Just rename those to .mpg(note; make a back up since this process is ereversible). If you did installed the application software provided, wait for a while after connecting, and it will pop up, ready to use. Note: some everio models will promt you what to do after connecting, just click the desired option. Good Luck

Hi, You can download this ftware from this link
http://powercinema-ne-for-everio.software.informer.com/download/

Cheers! Thanks! Sandy

Try this

http://powercinema-ne-for-everio.software.informer.com/download/

u dosn't install the software properly .again start installing the software in your laptop carefully then it may solve your problem .

Problem solved. I was thinking I could delete from the PowerCinema NE for Everio software program that comes with the camera but that is not the case, so it was just a matter of finding where all the video files were stored on the computer itself, ie, "myworks, Everio backup", and delete from there.

you can down load it at: http//www2.cli.co.jp/products/ne/update

The software iVerio might help you. It transfers and converts automatically all your videos from your HDD camcorder.

Have a look on the site http://www.convertmod.com

It is easier to connect your camcorder through the included "PowerCinema NE for Everio". First (since you're running Vista), you have to download a patch. Here is the address: http://www2.cli.co.jp/products/ne/update_everioM7SD/pcm4e_update.htm
Note: Only after you have installed PowerCinema NE for Everio can you install the patch. After you have installed the patch, just connect your MG130 to your computer through the included USB cable. Then the software should run automatically.
Hope this Helps

Eric

Under Windows XP, be sure you have upgraded to SP3. Then with the camera connected and Backup selected go into device manager t5hen disk drive. Find the drive, mine had two, uninstall them. Then turn off camera. Restart camera and select backup on the camera screen and let windows reinstall it. Should work fine. It did for me anyway.