HP 5610 Error 0xd0620230

hi, change printer's head carriage assembly.

check this out and let me know if it worked..
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&cc=us&lc=en&dlc=en&product=441125&dlc=en&lang=en

Try to reset the printer:

Unplug the printer from power

Hold the # and 9 together while plugging it back

If still not working try again with a # and 3 combination

I managed to track down some information that may be able to help you. Power off your printer, then press &hold buttons while powering on. If it doesnt reset then unplug it & press & hold buttons while plugging it in.
# & 3 Partial reset
# & 6 Semi full reset
# & 9 Full reset
A full reset will clear any stored information in th printer, speed dials ect. So always start with a partial reset and work your way up.
I hope this helps.

Error:0xd0620230 what is what.Can you help me...

Hi, 


Please follow the follwoing steps, 

1) unplug the power cord at the both ends from the printer and wall outlet. connect tto wall out let directly dont connect to printer.
2)Press and hold # and 6 while reconnecting the power cord to the product hold for 1 min after plugging the power cord, and then release both buttons, this should resolve the issue.

Regards,  raj_p5983

My mother's printer had a similar problem, I was able to find this solution on the HP site.

Disconnect the USB cable from the back of the printer, but leave the printer turned on.

Open the cover of the printer and remove the print cartridges.

Close the cover and wait for the Insert Ink Cartridges message to display.

Disconnect the power cord from the back of the printer and wait for one minute.

Reconnect the power cord. If the printer does not automatically turn on, press the Power button.

Open the cover and reinsert the print cartridges.

Close the cover. If prompted, print a calibration page.

Reconnect the USB cable, and try to print a print job from the computer.

I hope this helps you too...

UNPLUG PRINTER FROM WALL SOCKET PRESS # AND 9 AS YOU PLUG PRINTER BACK IN TO DO A FULL RESET

Fiend your solution direct from hp. Here is your solution...


http://www.hp.com/printer/prob676ijt65/solution
732

hhhmmm try to download a resstter for your printer model, cause that error code cud mean that some part of your printer has reach its limits, printers nowadays have a counter in it. if you cant find any resetter software for your printer you shoukd call the HP tech. support cause they are the only who knows the right key combination on your printer panel that allows the parts to be reset.