Gigaset AL110 REGISTERED , CANT DIAL OUT OR IN

You may download a copy of the user manual here.

HERE'S THE LINK TO THE MANUAL.
The handset is either too far from the base or it needs to be registered. The instructions are in the manual.

http://m.gigaset.com/medias/sys_master/A31008-M2050-L101-1-7619_30-10-2008_en_GBR.pdf

If the LCD shows Not Registered when you enter a One-Touch or a Speed-Dial number, it means that an email or number is not stored there.

If you selected E-Mail and save the E-mail address, you can only use the E-mail address when you are in Scan mode. If you selected IFAX and save the E-mail address, you can only use the E-mail address when you are in Fax mode.

Your machine has 20 One-Touch keys where you can store 40 fax or telephone numbers or E-mail addresses for automatic dialing. To access numbers 21 to 40, hold down Shift as you press the One-Touch key

You can dial in any of the following ways.

Manual dialing
Use the dial pad to enter all the digits of the telephone or fax number.

One-touch dialing

Press the One-Touch key that stores the number you want to call. (See Storing one-touch dial numbers on page 60.)

To dial One-Touch numbers 21 to 40, hold down Shift as you press the One-Touch key.

Speed-dialing

Hold down Shift as you press Search/Speed Dial, and then enter the three-digit Speed-Dial number. (See Storing speed-dial numbers on page 61.) Three-digit number

I can't get dial tone either. Let me know if you find a solution please.

Hi,
First of all you have to change the Dialing mode, DTMF or Pulse, according PABX type, ask to technicians!
Second step is to set up the Flash Time from 80 to 800 ms, again in dependency of your PABX Operating Instructions. Cheers and good Luck.

You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON%20CFX-L4000.pdf

Here is a transcript:

Storing Numbers for One-Touch Speed Dialing

Your Canon fax can store up to 120 phone numbers: up to 20 of your most frequently used numbers can be stored for One-Touch Speed dialing, and an additional 100 numbers can be stored for Coded Speed Dialing.

1. Press SET and DATA REGISTRATION

The display will show:

DATA REGISTRATION

1. SPEED DIAL SETUP

2. Press SET twice.

The display will show:

1-TOUCH SPD DIAL

01

3. Use the search buttons (up and down symbols) to select a One-Touch Speed Dialing button between 01 and 20.

The display will show:

1-TOUCH SPD DIAL

[1...7]

??¢ You can also do this by pressing FUNCTION, then pressing the One-Touch Speed Dialing button, then pressing FUNCTION again.

??¢ If a number is already stored at the button you select, that number appears.

??¢ If the button you select is registered for Group Dialing, GROUP DIAL appears.

4. Press SET twice. Use the numeric buttons to enter the fax number you want to store.

The display will show:

TELEPHONE NUMBER

TEL =

??¢ Press SPACE to enter spaces between numbers. (Spaces are optional and are ignored during dialing.)

??¢ If you want to clear a number or a mistaken entry, press CLEAR.

??¢ To enter a pause in the number, press PAUSE one or more times

You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON%20CFX-L4000.pdf

Here is a transcript:

Storing Numbers for One-Touch Speed Dialing

Your Canon fax can store up to 120 phone numbers: up to 20 of your most frequently used numbers can be stored for One-Touch Speed dialing, and an additional 100 numbers can be stored for Coded Speed Dialing.

1. Press SET and DATA REGISTRATION

The display will show:

DATA REGISTRATION

1 .SPEED DIAL SETUP

2. Press SET twice.

The display will show:

1-TOUCH SPD DIAL

01

3. Use the search buttons (up and down symbols) to select a One-Touch Speed Dialing button between 01 and 20.

The display will show:

1-TOUCH SPD DIAL

[1...7]

??¢ You can also do this by pressing FUNCTION, then pressing the One-Touch Speed Dialing button, then pressing FUNCTION again.

??¢ If a number is already stored at the button you select, that number appears.

??¢ If the button you select is registered for Group Dialing, GROUP DIAL appears.

4. Press SET twice. Use the numeric buttons to enter the fax number you want to store.

The display will show:

TELEPHONE NUMBER

TEL =

??¢ Press SPACE to enter spaces between numbers. (Spaces are optional and are ignored during dialing.)

??¢ If you want to clear a number or a mistaken entry, press CLEAR.

??¢ To enter a pause in the number, press PAUSE one or more times

You can download the User Manual from here (temporary link): http://dl.dropbox.com/u/1322442/CANON CFX-L4000.pdf

Here is a transcript:

Storing Numbers for One-Touch Speed Dialing

Your Canon fax can store up to 120 phone numbers: up to 20 of your most frequently used numbers can be stored for One-Touch Speed dialing, and an additional 100 numbers can be stored for Coded Speed Dialing.

1. Press SET and DATA REGISTRATION

The display will show:

DATA REGISTRATION

1 .SPEED DIAL SETUP

2. Press SET twice.

The display will show:

1-TOUCH SPD DIAL

01

3. Use the search buttons (up and down symbols) to select a One-Touch Speed Dialing button between 01 and 20.

The display will show:

1-TOUCH SPD DIAL

[1...7]

• You can also do this by pressing FUNCTION, then pressing the One-Touch Speed Dialing button, then pressing FUNCTION again.

• If a number is already stored at the button you select, that number appears.

• If the button you select is registered for Group Dialing, GROUP DIAL appears.

4. Press SET twice. Use the numeric buttons to enter the fax number you want to store.

The display will show:

TELEPHONE NUMBER

TEL =

• Press SPACE to enter spaces between numbers. (Spaces are optional and are ignored during dialing.)

• If you want to clear a number or a mistaken entry, press CLEAR.

• To enter a pause in the number, press PAUSE one or more times

Try punching in the number to call first THEN hit talk.. It should dial and call at that point..

Just like when making a call from your cell phn - dial the # first..

good luck ;o)

Usually picking up the handset and dialing " 9 " will get you another dialtone and then you dial the number you want. If you receive a busy signal it could mean your system requires another number to dial out or your phone is restricted from dialing out. When you pick up your handset or press the INTERCOM key you should get a triangle shapped light which means you can proceed with dialing your access code for making a call ( 8 or 9 ). Hope this helps, let me know ...Mike