Need Replacement LCD/Displays for NEC DSX 22B phones

For the NEC DSX DTL-8R-1, try pressing and holding the Volume Down button on the handset for 2+ seconds while the phone is in standby mode. This press and hold option toggles the Ringer Mute feature. It works when an incoming call is ringing or in standby.

The manual for the this phone is available online here: http://www.teamextenda.com/download/nec/NEC_DSX_Cordless_DECT_UserGuide.pdf .

I hope this helps.

Cindy Wells

There is no option for it on your extension because your "class of service" is not set for it. Probably the only extension set for name change is 301 if the default configuration was not changed.

Here's a link to the individual steps:

http://www.telephonesystemsdirect.com/necdsx/nec-dsx-knowledge-base/changing-the-name-on-a-nec-dsx-22b-display-tel/

A double-wink on the Intercom button indicates "Intercom Hold". Normally, lifting the handset and possibly pressing Intercom will take care of it. We had a phone for which that didn't work. In that case, use DSX System Administrator 3 to reset the station port. On the left side of the main window, click Reset Station Port under Utilities. Enter the extension number and click Start. It takes a few seconds and does not disturb other parts of the phone system. Hope this helps!

while the phone is hung up, press #725. Then press any line button that isn't solid green until it is. You just have to cycle to "Always"

From extension 300, dial #TD.
If you have other NEC DSX or NEC DS2000 questions let us know at http://www.nec-dsx.com

No, You must use an Nec telephone, thus the price. If you need it on one line only you could connect any cordless phone on the dial tone before the NEC system. This will ring and also you can call out but you will not be able to transfer from or to it and you cannot use any NEC system features.

NEC $279.45 from me [email protected]

Hey,

documents available at
http://www.necdsx.com/docs/documents.htm
Thanks,
Ekse

http://www.askemergent.com/downloads/aspire-phone-qrg.pdf

http://www.askemergent.com/downloads/aspire-phone-feature-guide.pdf

1. have the first call on the line (do NOT put on hold), (call 1 or 2)
2. press CONF key
3. dial 9 for an outside line and dial the number
4. press CONF **twice** to join calls.