Cannot program DirecTV remote for TV.

You must have a remote which will allow you to program in the Direct TV box to it. If you want to program your TV to your Direct TV remote, go here for more information: https://www.cabletv.com/blog/how-to-program-directv-remote/

Benny, Check the attached links, direct TV codes.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

DIRECTV Remote Control Code Lookup

How to Program DIRECTV Remote Control DIRECTV Support

DIRECTV Remote Setup to Change the TV Input Source

4 Simple Steps to Direct TV Remote Codes

How to Program DIRECTV Remote Control ' DIRECTV ...

https://support.directv.com/.../how-to-program-directv-remote...

DIRECTVTo do this, press and hold the MUTE and ENTER buttons while pointing at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. The screen will display Applying IR/RFsetup. To program your remote to control a regular HDTV (not a DIRECTV Ready TV) or audio devices, follow these steps: Press MENU on your remote.

How to Connect DIRECTV Receiver to TV ' DIRECTV Support

https://support.directv.com/.../how-to-connect-directv-receiver...

DIRECTVHow do I connect my DIRECTV receiver to my TV? Print. Email ... This will help you determine what cable to use to connect your receiver directly to your TV. ... For example, a DIRECTV receiver, DVD player, Blu-ray™ Disc player, o... How to ...

Remote Control Code Lookup - DirecTV

How to program your DIRECTV remote control:

Press MENU on remote.
Select "Parental, Favs and Setup".
Select "System Setup".
Select "Remote".
Select "Program Remote".

While aiming remote at device, follow onscreen instructions to program remote to TV, DVD, or other device.

How to program the white DIRECTV remote to your TV

Look up the control codes for your DIRECTV remote control.
Make sure your TV is turned on.
Slide the mode switch at top of remote to "TV".
Press and hold the MUTE button. This is located above the number 1 button.
While still holding down MUTE, press and hold the SELECT button until the green light at the top of the remote flashes twice.
Enter the first TV code you have. The green light on remote should flash twice.
Aim remote at TV and press PWR button once. The TV should power off.
Once the TV is able to power off/on and control the volume, slide the mode switch at the top of the remote back to the left (DIRECTV). Your remote is now programmed.

If the TV does not power off, repeat steps 4, 5, 6, and 7, using the next code for your TV brand.

If remote control fails to program using all available codes, try scanning for the code.

How to scan for TV codes on your DIRECTV remote

Make sure your TV is turned on.
Slide the mode switch at top of remote to "TV".
Press and hold the MUTE button. This is located above the number 1 button.
While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
Then enter 9911, the green light on remote should flash twice.
Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
When the TV powers off, press and release the SELECT button.

Note: If the green light flashes three times before TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver, however your TV may not be compatible with our remote control.

You can find more help in the Remote Controls section of our Technical Forums at forums.directv.com. You can also use our Interactive User Guide to learn the ins and outs of your remote control.

On your DTV remote, select MENU, Setup, remote control, and follow the on screen directions. If you need more help, please contact me.

I believe the remote has to be re-programed. Press menu,system setup, remote control, program remote, TV, scroll down to vizio, then follow programming directions. Hope that helps.

could not find your brand at Directv.com but this may work: " You may still find a setup code that works for your device by stepping through the library codes in your remote. The following instructions will help you do this.
StepNSet
Set the "Mode Switch" to the desired mode such as TV for a Television.
Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
Enter the code "991" followed by the "device number"
for Televisions
for "AUX 1" devices - VCRs or DVDs
for "AUX 2" devices - Audio
You can step through the setup codes for this mode by pressing the "Channel Up" key to go forward through the codes or pressing the "Channel Down" key to go back to the previous codes.
You can try out each code by pressing one or more function keys such as power, volume or digit keys.
When you've found the setup code that works for your device, press the "Select" key. "

Ok it took me a while. Go to this link to find the codes for you remote: 10054 is the most used code for Magnavox. I hope this helps you out. Good Luck!!!!!!!
http://www.directv.com/DTVAPP/content/remote_codes

Here's how to program your DIRECTV remote control:

1. Press MENU on remote.
2. Select "Parental, Favs and Setup"
3. Select "System Setup"
4. Select "Remote"
5. Select "Program Remote"

While aiming remote at device, follow onscreen instructions to program remote to TV, DVD, or other device.


How to program the white DIRECTV remote to your TV

1. Look up the control codes for your DIRECTV remote control.
2. Make sure your TV is turned on.
3. Slide the mode switch at top of remote to "TV".
4. Press and hold the MUTE button. This is located above the number 1 button.
5. While still holding down MUTE, press and hold the SELECT button until the green light at the top of the remote flashes twice.
6. Enter the first TV code you have. The green light on remote should flash twice.
7. Aim remote at TV and press PWR button once. The TV should power off.
8. Once the TV is able to power off/on and control the volume, slide the mode switch at the top of the remote back to the left (DIRECTV). Your remote is now programmed.

If the TV does not power off, repeat steps 4, 5, 6 and 7, using the next code for your TV brand.
If remote control fails to program using all available codes, try scanning for the code.


How to scan for TV codes on your DIRECTV remote

1. Make sure your TV is turned on.
2. Slide the mode switch at top of remote to "TV".
3. Press and hold the MUTE button. This is located above the number 1 button.
4. While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
5. Then enter 991, the green light on remote should flash twice.
6. Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
7. When the TV powers off, press and release the SELECT button.

Note: If the green light flashes three times before TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver, however your TV may not be compatible with our remote control.

if you go to: http://www.directv.com/DTVAPP/global/contentPageIF.jsp?assetId=P4380052#h:1020.450


it has different remote codes. you would have to select "satellite setop box" also you need the model # of the receiver which can be found (normally) behind a door on the front panel of the receiver on a sticker (where the access card and reset button are) if its not a directv receiver, (hughes, etc) then it would probably be on the back of the receiver you would see a sticker with the model # of this receiver.

the first code should be 00001 follow the instructions on how to program on that website.

1.Press menu on your remote and then go to settings and press select on setup.

2.Go to remote and then go to reset remote.

3.Press and hold MUTE and SELECT until the light above the mode on tv switch on the remote flashes twice.

4.Enter the code using the numbers on your tv.

5.you have cleared AV1,AV2 and tv modes.Move the switch back to DIRECTV;press select on done.