ERROR CODE 0X5 - eMachines Computers & Internet

comment faire car lors de l'installation de avast free il m'affiche ....(0x5)...

in which disk the OS is present and which Drive office software is present?

Its best you log a case with HP support. If your system is still under warranty or if you bought support along with the system, they will fix the problem for you.

can not load video studio error (-5004:0x5)

Hi Fatoil ,

Have you tried another SCSI port , another SCSI card , another SCSI drive , swopping if it is card problem or drive or both problem ?.

If you have a spare SCSI hd , plug it in to same port and see if it works . Swop to another port and see if the spare SCSI hd works. Swop to another SCSI card and see if spare SCSI hd works.

All this elimination will narrow down the problem .
SCSI cards are not expensive ,.
old working SCSI hds don't cost you anything if you have them.
Sending out the server for servicing will cost you.
I presume you don't have a maintenance contract for this server .
If you have , get them down to settle it .
If you don't , after you settle this matter , make sure you get a maintenance contract for all your critical servers / equipment.

Maint Contracts seem expensive when nothing breaks down. However , when they do , it makes every worry go away.

Good luck,
David

It sounds like the built in powersaver utility is crashing. Assuming you can log into the OS after the error, go to Control Panel - Power Options and change to some other (or none at all) setting. And/or uninstall the application completely.

If you can not even get into windows you could try changing the power settings within to bios to disable power saving at all, and that might allow you to boot properly and then turn off/uninstall as described above.

Have you download the latest VGA drivers for your board:
http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P5VD2-MX&type=map&mapindex=4

Give it a try.

Download the hotkey utility from the toshiba web site. I got this errorafter installing service pack 2 for xp. The hotkey utility fixed it.error appeared every time I started windows xp. Go to:http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
and go to downloads, select model and download:
Toshiba Hotkey Utility
Install and restart, problem solved. thank you, thank you...