How do I turn off the date option?

To set the date and time on your camera, follow these steps:

Turn on the camera and set the language and date/time by following the instructions in the Extended User Manual.
Once you have set the date and time, you can turn on the Date Stamp feature by following the instructions in the User Manual . The date and time will be stamped on all pictures taken with this feature enabled.
KODAK CD82 - EXTENDED GUIDE EXTENDED USER MANUAL Pdf Download ' ManualsLib

KODAK EASYSHARE CD82 USER MANUAL Pdf Download ' ManualsLib

Turn on the [Date Stamp] setting in the [Rec] menu. See page 83 of this manual.

Yes it does! For more information on how to set the date and time please view page 54 in the Owner's Manual. Page 55 will also help in locating in the menu where to set the imprint option.

The time it took the picture? You want to know if the camera will show the time it took the picture using the self timer?

My answer is Yes and No.

Do you have your camera set to showing the date and time on the pictures now? If you do, then using the self timer would not change anything.

If you do have it set to showing on the picture and you don't want the date and time to show then change the setting on the menu function of the camera and turn this option off.

If you do not already have the camera set to show the date and time, using the self timer option is not going to make it suddenly appear.

Manual can be downloaded free from here ....

http://safemanuals.com/annexe_POWERSHOT%2020A550%2020CAMERA%2020USER%2020GUIDE%2020ADVANCED%2020_CANON_POWERSHOT%20A550-_E.htm

Basically the date stamp can be turned on / off as an option on the RECORD menu. Page 33 of the manual explains it (with pictures).

Note that if the option is turned on, it states that the date / time is permanently embedded in the picture.

Hope this helps

:
The date and time can be included on the pictures taken only with the camera in postcard mode. You must also activate the date stamp option in the menu.
To set the camera into postcard mode, press the [Func.] button on the camera, then use the [arrow down] key to go down to the last option in the menu, and there you can choose the [Postcard mode]. Press [Func.] again to exit the function menu.
To set the date and time stamp, press the [Menu] button and then use the [arrow down] button to go to the [Date stamp] option in the menu. You can set this to "Date" or "Date & Time". Press the [Menu] button again to exit the menu.
Be aware that if you take pictures with this option enabled, the Date and Time cannot be removed from the pictures at a further time. It will permanently appear on the picture.

Please rate my help++++Thanks for using FIXYA

Well ,there's good and bad news.

the usermanual....

http://safemanuals.com/user-guide-instructions-owner-manual/CANON/POWERSHOT%20A2000%20IS-_E

suggests that you need to set the time and date (How to - page 18), as its stored with each image. There appears no option to turn it off "at the recording stage".

However, on page 118, hidden in the <print settings> menu the option there is the option to turn off (suppress) the date on printing.

So it would suggest that the file is kept separately from the image.
...... Which probably means if you look through the official software you see it, but if you looked at the jpeg through another viewer (such as xp media center, adobe photoshop, photosuite etc ... there are lots) it may not show up on the projected image.

Just a theory, but one worth looking into?

In the Camera Settings there is an option to Enable/Disable the date stamp. Look for that option and enable it to get the date on your clicked pics. In the settings only you will find the clock settting / date/time settings to adjust the date and time. Refer your manual.

Turn the Camera on

Press the lower of the two buttons on the back which border the screen - the one marked "menu"

this will bring up a screen with two tabs - the left tab marked "capture"

Scroll down to the last item on the list under the captrue tad - it should read "date imprint"

Switch it to "off"

You are done.

Even in your playback mode you have to activate the date/time options.