Tv won't power on, stand-by light blinks 6 times continously

your tv has problem in the horizontal circuit caps in the horizontal circuit should be checked also the jungle ic.and the regulator in the power supply.have a tech repair your tv if your are not a tech. good luck.

Sounds like power supply fault in TV. Need to take to TV repair shop.

go to turn tv on,hear a poping noise,once then tv standby lite blinks 3 times repeatily but no picture or audio.can you help me out with this thank you

Unplug it from the wall, wait 2 minutes and plug it back in. if problem still exists, its probably the main pcb.

your lamp is out call mits and get a new lamp and only buy from mits!!!

yes you have defective horizontal output! that is from the power section near at the flyback!

call tech and suggest c-chips.

If you have sound but no picture it means that your power supply and tuner are working correctly. The number of times the timer LED blinks is the code for the problem with the picture. The computer will stop the picture and blink the timer LED if the vertical circuit stops working, if the picture tube is too weak or if the horizontal sweep has stopped. The set should be serviced by a qualified tech familiar with Sony sets.

Sony has a code for those blinks indicating the problem area. Count the blonks till the pause then google Sony blink codes for the area to fix.