Trhreading I have a euro-pro delux denim machine. My problem is threading it

https://ebooktop.website/download/sewing%20machine%20euro%20pro%20x

call this number and ask them
1-800-487-7397

here are 3 sites to email about the parts you need
sewingpartsonline.com
sewvacdoctor.com
a1sewingmachines.com

try these sites for a manual
Euro-pro.com
Retrevo.com
home appliance.manualsonline.com
sewvacdoctor.com
searspartsdirect.com
thecolorfulworldofsewing.com
sew4less.com
sewingpartsonline.com

Call Euro-Pro at 1-800-361-4639 and ask them.

My needle will not pick up my bobbin? I have tryed everthing! my bobbin was placed in the holder right. my needle is in the EP correctly! not sure if my Thread is correct in my machine. but I have read the manual and still cant get the needle to pic up. Can some one help me out on this! Euro-PRo 380A

Check to see if the needle is inserted with the flat side of the needle shaft facing to the back of the machine.

I've never had an auto needle threader work properly for very long. My suggestion is to not bother to replace it and just relearn how to thread the needle. Sorry.

I need to know where I can purchase a foot pedal for my Euro-Pro Denim 1260 sewing machine.

all machines thread the same. TTN tension,take up, needle.
Beginning with the spool guide the thread through the thread guides to the tension assembly. Pull the thread through the tension assembly and test it to make sure the tension is working correctly.
(To do this test,adjust your tension setting to normal or medium or 5 or something in the middle. Raise the presser foot and pull the thread through the tension. It should pull easily!! Lower the presser foot and pull the thread. It should pull noticeably harder.) If it passes this test, continue up through the take up lever,then down through the thread guides to the needle. Make sure your needle is fully inserted and turned the correct way.( If you load your bobbin case from the left side,the needle rule is normally FLAT to the RIGHT is RIGHT. There are some exceptions. If you have a newer style drop in bobbin or your bobbin case loads in the front then the rule is FLAT to the BACK.

Sewman7