Hook it up to the tv

looking at the back of dvd player. left top side
y Video
p R
p L
RCA cable yellow plug goes in Video out
Red and White plugs do Audio
on tv
look for AV in
cable plug into yellow socket
Red goes on Red socket Audio in
White goes into White socket Audio in
Y p p is component out - not sure if your tv has component in . AV in is more common .

Use HDMI Cable to Connect.
or use AV In / Out Cable (2+1 type - Yellow, Red, White) Yellow Goes to Video Signal and Red and White goes to Audio Input of TV.

hi that"s easy thing. first connect rca wire red white yellow to dvd hook up same colour red white & yellow female rca connection. then use another rca wire connect to your tv be video input in yellow one . red & white be sound input - red to red . white to white. just that. good luck!!

I hope this will clarify things, you have 3 connections on each end.
DVD

• Yellow Cable goes on Video Out (Yellow)
• White Cable goes on Left Audio Out (White)
• Red Cable goes on Right Audio Out (Red)

TV

• Yellow Cable goes on Video IN (Yellow)
• White Cable goes on Left Audio IN (White)
• Red Cable goes on Right Audio IN (Red)

the coaxial audio connection does NOT need to be connected.
I hope this helps,
Magoo

Do you have a newer TV or a older one lets start with a newer models does your tv have 3 or more jacks on the back or front you should see a RED, YELLOW and WHITE if you have a HDTV you should see more. (LETS HOOK UP) Did your DVD/VCR come with a cables if not you will need to buy at least 2 they are called RCA cables Lets start with the dvd/vcr combo on the back you should see a (LINE OUT) this is where playback or your picture and sound come out. On the back of the TV you should see a (LINE IN) this is where you plug it in to. RED goes to RED, WHITE goes to WHITE and YELLOW goes to YELLOW. To Record you will need to hook up the line in on your combo and the line out to your tv. ( IF YOU HAVE AN OLDER T.V WITH NONE OF THOSE JACKS ) you will need to buy a RF- MODULATOR the are cheap it is a box that let you hook a cable wire to a little box and the RCA jacks to you combo and you will turn your tv to channel 3 or 4

put the tv on av

#yellow cord in yellow socket
#red cord in red socket
#white cord in withe socket

now power the dvd

#Yellow cord in yellow socket
there will be 2 places for the red and white cords
#the red and white cords must be inserted in the audio,
# you will see them next 2 each other
insert them you it will work.
For More Info Email To [email protected]

The yellow and white cables hook into your tv inputs

Yellow-White and Red will hook to AV Input in TV and you can find same colors female pins at back of TV.

If cable is hooked through cable box with a coaxial cable, then turn tv to ch 3 or ch 4 as appropriate.

If cable is hooked through any other type of cord (red/green/blue or red/white/yellow) use the AV+ or Source button to change your source to Av1, AV2, HDMI, or however you have the cable box hooked to TV (I am assuming your TV is a Philips).

I am guessing that your game is hooked to the cable connector on the back of the tv and is switched. Do you know you can get a special adapter that uses the rca jacks (white,red,yellow) out of the dvd to the adapter and then out of the adapter with coax to the cable connector on the tv where the signal goes. I think you can get them at WalMart or Radio Shack. Upgraded tv's have the red white and yellow inputs for dvd. Hope this helps.