How to reset samsung ES95 lcd colors - Nikon D40x Digital Camera

Customer care support service NUMBER +1--833^^272--0777,,,,,,,,CALL THEM. customer care support service NUMBER +1--833^^272--0777,,,,,,,,CALL THEM
saya mempunyai camera samsung ES95 baru dua bulan 4 bulan entah knpa pas saya mau pakai terus saya hidupkan/ tekan tombo; power nda mau nyala2 padahal kamera saya aman2 ajx kondisi sebelum saya hidupkan batrai full kondisi nda aman
ada yang tau nda gaimn cara hidupkan
terimakasih ???

Imaging drum reset chip Ebay £15
http://www.ebay.co.uk/sch/i.html?_odkw=Imaging+Drum+reset+chip+for+Samsung+Xpress+SL+C410W+Xpress+SL+C460FW+SL+C460W&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.XImaging+Drum+reset+chip+for+Samsung+Xpress.TRS0&_nkw=Imaging+Drum+reset+chip+for+Samsung+Xpress&_sacat=0

there is something wrong in connecting pins in new display,check thoroughly,,,,,then factory reset by recovery options,,,,,should be ok,,,otherwise new screen display is defective

What support do u want, not very clear

Okay...first of all, you have your problem listed in the wrong place.

This is the link to the Samsung Website page that will allow you to register your warranty:

http://cybersvc2.samsungcsportal.com/cyberservice/csc/account/login01.jsp?locale_id=au_nz&ssoUseYn=N&ssoLang=en

Check the color settings in the menu. It has white balance and color correction that can be adjusted by hand. If you don't know how to adjust the color balance, just reset the color settings or choose a preset color selection (Dynamic, Movie or Normal).

hi if you bring the menu up and it's clear then you have a tcon board fault, if the menu is the same as the picture then you have a mainboard problem, thanks

shaun

I also have a samsung 40 inch. Try hitting the menu button on the remote the scrolling over to the right once and scroll down and hit pictures reset to see if that works. If it doesn't check your connections coming from the back of the source and the tv itself.

1. Verify connections are color coded.

2. If they are correct, take out movie, press Play/Stop at same time on the front of the unit (not remote) to reset any settings that may have been changed.

see on your keyboard maybe is some word is jammed,or hold code button and turn on the machine