Can I install a 3 prong dryer power cord versus a 4 prong one and will it work?

yes that is correct. electrical requires 4 wires 2 are power 1 is neutral and other is ground



https://www.thespruce.com/change-dryer-cord-3-prong-to-4-1152248


How to install Electric Dryer Cord 3 or 4 prong Ground Wire explained

Un screw the 2 hex screws from the back of the dryer where the cord goes in.

There will be 3 screws that connect the cord to the dryer, loosen or remove them to remove the 4 prong cord.

A hardware store will carry the 3 prong cord you need, tell them it is for a dryer.

Re-connect the 3 prong cord to the dryer.

Plug in and test after you have installed the new cord.

Hi,
Here is a tip that will help you with changing your dryer plug. Dryer Cord and Wiring Dryer 3 Wire or 4 Wire



heatman101

Hi,
Here is a tip that will help you with changing your dryer plug. Dryer Cord and Wiring Dryer 3 Wire or 4 Wire



heatman101

There is a difference between how a 3 prong and a 4 prong power cord is installed. Please read the following link:

http://www.fixya.com/support/r3575913-installing_a_220_vac_appliance_cord

If you have the power cord installed correctly and still do not have power, please check for 220-240 VAC at the wall receptacle. If you require additional assistance, please post back with your MODEL NUMBER and let me know. I hope this helps you.

Here is the correct install

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

go to walmart and get a 3 prong cord($15) and install it on your new dryer-mike

IF you find that you have only a 3 wire feed for this dryer (and the reason for the 3 prong receptacle)...then you can not properly install a 4 prong dryer cord to it. You now have 2 choices....either rewire (assuming that it is a 3 wire supply) the entire run from the dryer breaker to the outlet location with 4 wire (typically a run of 8/3 with ground having a black, red, white and bare ground)and install a 4 prong dryer receptacle to match the configuration of the new dryers cord.....OR - you can remove the 4 wire cord and replace it with a 3 wire cord....re-using the ground strap - IF it is still in place.




If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

The following link explains how to connect a power cord to your appliance:

http://www.fixya.com/support/r793520-3_prong_4_prong_power_cord_conversion

Now keep in mind, some newer appliances REQUIRE a 4-prong plug in order to work properly. You may consider having a four-prong outlet installed to accomodate your dryer.

You can try these steps by referring to to section that discusses converting from a 4-prong to a 3-prong power cord.

If you have questions, please let me know. I hope this helps you.

Purchase a 3 prong cord at a home improvement center. and replace your 4 prong cord. all you need is a screwdriver.