I was watching tv it was working fine,i left the room,came back a few minutes later the screen was black but i still had sound.
No video but good audio Mitsubishi VS5051. Check R509 and R 519, 100 ohm resistors located on the main PCB near the flyback transformer. Also bad connections on any of the yokes and the vertical output IC will cause the same problem.
Please help me out on my Mitsubishi VS-5051.
Is working fine, but after 10-15 sec. the screen came black. Please give me hint how and where i can find the problem.
SHUT DOWN CAN BE INTERMITTENT OR AT POWER ON. CHECK FOR LEAKEY OR SHORTED Q570 PART # 260P560040 ON THE MAIN PCB.
414 views
Usually answered in minutes!
My TV's colors are all messed up and needs to be aligned,but the convergence that I can use on TV doesnt correct the problem.Is there anyway to access internal convergence so I can converge it
My mitsubishi 1080I projection tv picture blinks in and out like your eye blinks but does not go black and sound is still there. Eveything else works too
×