You can not tell me what setting to use on LANIER P-165 so that i can record someone and how far from them

Hi,
I used to work for Lanier repairing all the tape machines. The sound you are referring to is feedback coming from a dirty record/playback switch.
You would need to either disassemble and clean the switch, which would take some dexterity, or replace the switch entirely, which would require good de-soldering skills and of course the replacement switch.
Unless there is some sentimental attachment to the device, I would recommend you use a digital recorder, as the cost of repairing the unit if you took it to someone would far outweigh its value.
Cheers,
Dave

Precisionroller.com/

It needs an internal switch replaced, called the mute switch.

All parts are discontinued, but [email protected] still has a stock of Lanier parts.

Itrizuto: Did you ever figure this out? I have the same question.

I believe c-41 is a fuser problem. A trained copier tech may be required to troubleshoot.

There is a fast play switch on the side of the unit. That switch may be failing. Try moving it back and forth repeatadly to clean up the contacts.

Send an email to [email protected] or call (800) 644-9525. Please indicate model, serial and detailed description of problem
are the Best

Should be a tape speed switch on that unit under the door.

The Lanier P-165 has a slide switch on the side for master power off / on. Also the battery contacts get flattened over time, a letter opener can help you get these sprung back out to make contact with the battery. Anything more than that consider it toast, serious professional tape units havnt been made in 4 years now. Its all digital now.