Help. I have a Truetemp GE Range. The oven heating element went out(it uses part no#wb44x10016)sorry, I don't know the model number. Anyway, How do I take it out and/or replace it?

The heating element on the top part off oven might be bad or a fuse that's located on back of oven either on or behind back panel.

You can order one from Repair Clinic Here is a link to the part and a video on how to change it

http://www.repairclinic.com/PartDetail/Bake-Element/WB44X10016/260870

Hello Damaya,

I am sorry to inform you that this is not the proper model number of your unit. The model number you give is for a Frigidaire electronic air cleaner. Your model number should be located in side or around the facing of the oven or compartment below the oven. If you can post back to this thread I will be more than happy to locate the cow-rod you need for you oven and explain how to change out the part.

Thank you for using FIxya and please do not hesitate to ask questions.

I had a similar problem.The power failure might just have been a coincidence.Sounds to me like your lower oven igniter may have gone bad such as mine did.

you may want to check your broil element
turn the unit on and wait a few minutes
see if you can feel the heat from the upper broiler elemnet
some model use both elements to preheat
i dont have your productiuon number so i cannot be sure with your model
anyway
14-20 mins is the industry standard for a 350 preheat...

The model number should be on a tag as shown in the drawing below.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

I just had the same problem. Just remove the rear panel of the range and unplug the two leads. Now go to the two screws inside the oven and remove them. The heating element will now come out and you can insert the new element the same way. Replace the two screws inside the oven and then attatch the two leads in the rear. Replace the rear panel and you are set to go.

get the model number and order the exact repacement bake element

We got one used too. It would kinda heat up on broil and would not heat up for Bake. There is two heating elements the one on the top is only for broil or convection (partially). The other is under the cover on the bottom near the back of the oven it is primarily for Baking. We have a repair plan through our utility company and they replaced that heating element which is why I cannot give you too much specifics on how to get to it, but it is there and it fixed our problem. Hope this helps we absolutely love this oven now that it works so keep trying!!