Generac Guardian 0C3025 -  oil pressure switch Logo
Posted on Feb 18, 2009

Oil Pressure switch for 2001 Chevy Cavalier

Where is the oil pressure switch located on 2001 Chevy Cavalier and how do I change it

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Feb 18, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Feb 16, 2009
Answers
9
Questions
0
Helped
8141
Points
34

Two different engines:2.2 liter (most common) on right side of engine , towards firewall , same side as the oil filter.Single wire connector & wire color is tan with a black stripe. The 2.4 liter engine (Quad4) is located at the top rear of the engine same connector & same color wire. You will need a special tool. if not available a deep socket, or a big wrench or you can get creative with pliers.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Aug 17, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Aug 17, 2010
Answers
2
Questions
0
Helped
3780
Points
2

Oil light come on and off

Ad

1 Related Answer

Anonymous

  • 9 Answers
  • Posted on Jan 24, 2011

SOURCE: cant find the oil pressure sensor location

what engine are you installing this on? V-6 or V-8 Chev should be rear of intake by the distributor.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Chevy 350 oil pressure sending unit

The Oil Pressure Switch is located:Under hood, center, rear engine area, driver side of distributor, mounted in block. Here's what it looks like.he oil pressure switch is mounted to the top rear of the engine.

  1. Remove the electrical connector from the switch.
  2. Remove the oil pressure switch.
  3. To install, reverse the removal procedures.
0helpful
1answer

My oil pressure sensor started leaking oil through the plug.

pretty common same thing with my 2001 2 door chevy cavalier. its the valve cover gasket, you need to replace it.
0helpful
2answers

My oil light comes on. the car has oil. runs like a champ no noises of any kind sounds like it always has. iv been told its the oil presh senc going bad or has gone bad. any thoughts? its a 1999 chevy...

i'd agree sounds like a faulty oil pressure switch.doing a pressure test with a guage will
tell for sure or just replace switch ($15 part)

good luck
6helpful
2answers

Oil pressure switch location on 1999 chev cavalier

The oil pressure switch relays the oil pressure in the engine to the instrument cluster. The switch will illuminate the OIL PRESSURE light if the oil pressure drops below 2psi (13 pa). The switch is usually located on the side of the engine, under the intake manifold on the 2.2L engine and on the side of the intake camshaft housing on the 2.3L/2.4L engine.


7fef8ab.jpg

Fig. 1: The oil pressure switch is located on the engine block under the intake manifold and is accessible from underneath the vehicle-2.2L engine

bdee34a.jpg

Fig. 2: Oil pressure switch location-2.3L/2.4L engine


Other, the low oil level switch activates the OIL light in the instrument cluster when the oil level in the pan goes below a certain level. The switch is mounted on the oil pan.


Hope this helped (remember rated this post).
4helpful
1answer

My 2001 chevy cavalier has a oil leak and I can't

You can buy a florescent dye to add to the oil and a light to make the dye really shine.
Clean the engine with "brake clean" from a spray can at the oil leak areas ....then run the engine.
Check for the start location of the leak.
Start with a short run time ....... then longer run time if necessary until the leak(s) show.
With or with out the dye ......this brake cleaning method should help locate the leak(s).

Oil leak locations could be...in order of the most common on your car are........valve cover gasket,oil filter,oil pressure sending unit,drain plug,oil pan gasket,crank pickup sensor,rear seal.
6helpful
1answer

Location of oil pressure switch.

how change oil pressure sensor in 2001 mazda mpv dx
Not finding what you are looking for?

3,001 views

Ask a Question

Usually answered in minutes!

Top Generac Guardian Electrical Supplies Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66978 Answers

Are you a Generac Guardian Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...