A G.E. cordless phone 5.8 gig the two phones the main one works fine but the other has no dail tone it reads out caller I>D> and part of the number calling in I have put in new batteries but still does not work.
Serial Number 60302343 Model 25931 EE2-A, any clue as to why this is happening.
recharge cradle model 5-2687
SOURCE: GE 25931 Trio Cordless Phone Answering Problem
Try charging the phone on the main handset - Good luck!
SOURCE: No dial tone on handset
It may not be registed with the main unit. You may need to register the handset. With my uniden all i have to do is put it in the main base until it says what handset it is (it should be a number).
If you have any questions please dont hesitate to ask
SOURCE: Uniden Dect2080 with 5 cordless phones
try using the telephone cord and jack from the phone that is working with the phone that is not working, if it now works the problem is the jack you were using or the phone cord. If that doesn't solve the problem, unplug the AC adapter and the phone cord for the non-working phone and let it sit for a couple minutes, plug them back in then try to make a call.
SOURCE: No dial tone. Cannot call/recieve.
Have you tried placing the handsets in the base unit to resync them? (not the axillary charger)
Have you confirmed that the phone jack and wire are still working? (e.g. plug in a known-good corded phone and make sure the signal is still good)
Post back with the "Add comment" button on the right, and we'll see what we can do to get it fixed.
437 views
Usually answered in minutes!
Model # 26955SE1-B GE 900 MHz Cordless/Corded Speakerphone Cradle # 5-2478 Everything about my cordless 2nd phone works except I can't hear anything (i.e. no dial tone-people can hear me but i can't hear them.) I figure something went wrong with the speaker (earpiece)? It used to work. It was used in bathroom. Could water have splashed on it, maybe?
×