DENON AVR1613 NETWORK CONNECTION PROBLEMS - Denon AVR-1613 Receiver

Your denon amp amp does not match and work well
in some players for instance "Samsung" no pictures
and sound via HDMI input. Only replacing players
to another brand such as LG can fix the problem.

What is the exact model of the denon?
Thanks,
Lee

how do i connect pioneer cd player to back of denon receiver

Did you find solution ? I have that same problem.

direct from Denons website "

Why can't I access Pandora on my Denon networked product?

Please be advised that Pandora has recently altered certain connection requirements which have temporarily blocked our products from connecting to the Pandora service. Our Engineering Dept. is currently working hard to correct this and will have a firmware update available as soon as possible via the internet to resolve this issue. This should not affect your product's ability to receive other music streaming services. Please visit our website for firmware update schedule information after December 6th.
We sincerely apologize for any inconvenience that Pandora's alteration has caused.

We can't make assumptions about proper and complete setup if you don't explicitly mention the steps involved, so... did you assign and select the digital inputs properly?

http://www.retrevo.com/s/Denon-AVR-2803-Receivers-review-manual/id/363bh829/t/1-2/

Page 23 etc

BTW: I concur with your decision to send the video directly to the TV from the BD even though Denon and others expect it to make a hop through the receiver first.

Get into your BD and find its audio out setup. Make sure its settings for digital audio output bit rates, speaker presence, type, size, distance and bass-handling are set correctly.

Often the wireless network requires a password or something to allow new devices to connect up. Check the network to make certain it will allow the device to connect.

How do I connect direct tv to denon and then get sound

If the RCA TV has HDMI input connect as follows:

1. Connect an HDMI cable from the Directv box to an HDMI input on the Denon.
2. Connect an HDMI cable from the HDMI out-put on the Denon to the RCA TV
3. Select input the DirecTV is connected to at the Denon, at TV select HDMI input Denon is connected to TV.
4. On front of denon press the input mode button to select auto


If the RCA TV has Component input (Green,Red,Blue) connect as follows:

5. Connect Component Video and Audio cables from the Directv box to a Component Video and Audio input on the Denon (TV, DBS,VCR).
6. Connect a Component Video cable from the Denon to the RCA TV Component Video input.
7. Select input the DirecTV is connected to at the Denon, at TV select component input Denon is connected to TV.
8. On front of denon press the input mode button to select aut


If the RCA TV has Composite input (Yellow) connect as follows:

9. Connect Composite Video and Audio cables from the Directv box to a Composite Video and Audio input on the Denon (TV, DBS,VCR).
10. Connect a Composite Video cable from the Denon to the RCA TV Compositet Video input.
11. Select input the DirecTV is connected to at the Denon, at TV select composite input Denon is connected to TV.
On front of denon press the input mode button to select auto

If the RCA TV has HDMI input connect as follows:

1. Connect an HDMI cable from the Directv box to an HDMI input on the Denon.
2. Connect an HDMI cable from the HDMI out-put on the Denon to the RCA TV
3. Select input the DirecTV is connected to at the Denon, at TV select HDMI input Denon is connected to TV.
4. On front of denon press the input mode button to select auto


If the RCA TV has Component input (Green,Red,Blue) connect as follows:

5. Connect Component Video and Audio cables from the Directv box to a Component Video and Audio input on the Denon (TV, DBS,VCR).
6. Connect a Component Video cable from the Denon to the RCA TV Component Video input.
7. Select input the DirecTV is connected to at the Denon, at TV select component input Denon is connected to TV.
8. On front of denon press the input mode button to select aut


If the RCA TV has Composite input (Yellow) connect as follows:

9. Connect Composite Video and Audio cables from the Directv box to a Composite Video and Audio input on the Denon (TV, DBS,VCR).
10. Connect a Composite Video cable from the Denon to the RCA TV Compositet Video input.
11. Select input the DirecTV is connected to at the Denon, at TV select composite input Denon is connected to TV.
On front of denon press the input mode button to select auto

check the setting for the HDMI connection at the Denon you may have to assign the HDMI audio setting also on the front of the Denon while in the DVR mode press the input mode button on the front of the Denon to select auto and if that doesn;t give you sound you will have to connect a cable from the DVR optical.coaxial or analog audio output to the Denon and setup for that type of audio connection