My Element Electronics ELDFT406 TV constantly turns off

SOURCE: LG 42LB5DF Horizontal lines when first turning on

I got my main board replaced under warranty and this fixed the problem.

SOURCE: i connected my (element electronics tv fl-3210)

take baseball bat and hit,hit,hit

SOURCE: Element Electronics FLX2211B 22 in. LCD TV will reset every time

I have run into the same problem with a different model (32 inch from Circuit City). You may have found that there is almost no support from the co or web. I do not have an official solution but have some work arounds that have done the job for me.
WA#1 = after a channel scan tune to a HD/digital channel before you turn the set off. You need to do this each time for several times, because the set when turned on to a regular cable or analog station will default to skip all channels. After several times the set should remember your channels.
WA#2 = after a channel scan, go to the skip channel section of the menu, and if your remote has the colored buttons on the bottom scroll through the channels using the red and green (up and down on this menu) buttons. This apparently helps the set remember not to skip your scanned channels.
These are not glamorous solutions but appear to trick the TV into not re-setting the skip function for the channels.
Best of luck.

SOURCE: LG 32LX3DC 32 in .Model

Hello Dupree71

The first thing I would do as its from a HOTEL is take the LG telly out of HOTEL MODE. follow the steps below, This should allow you to change the settings on the telly and store them. So when you turn the tv back on it will not revert back to the hotel Options

TV turned on. Hold down the MENU button on the remote for approx 5 seconds then type in 1105 this will take you to the LG hidden Menu.

in this menu there will be hotel mode turn this option off.

This will allow you to save your own setting without it jumping back.

When you follow my steps and its sorted for you please leave a thumbs up for me Please

Thanks

Little Dish Fitter

SOURCE: Element tv.. model # ELCHS261 stopped working

My Element ELCHS261 will not turn on at all. The only thing it does is the red light will turn to blue but no sound and no picture. My troubleshooting items have been changed the batteries in the remote then I unpluged the power for for 30 minutes and still nothing.