How to fake sessions in reading plus - Audio Players & Recorders

Sorry - it is a fake! I have the same watch serial number bought at a fake goods store in Beijing (Yashow), and yet another is posted for sale here: http://www.oztion.com.au/buy/auction...itemid=8398193
Still, the fake I have is a good quality fake, good crystal and good quality and has been working well for a year... still worth the $80 I paid for it including skin tax!!

It's probably a fake one. I had the same problem; I bought a 16GB one for few bucks from an online store, but it was fake so I faced the same problem.
Read this guide to determine if your memory stick is fake or not: http://reviews.ebay.co.uk/FAKE-Sony-Memory-Stick-Pro-Duo-MagicGate-Cards-Exposed_W0QQugidZ10000000001535763

If it's not fake, then there might be a problem with your memory stick. Try replacing it with a new one if possible.

Hope this helped.

Look on the link below to learn how to tell if they are fake.

http://hubpages.com/hub/How-to-Spot-Fake-Oakley-Sunglasses

Good Luck

you probably cleaned the disk or you could by a newer version of the game mine did the same thin 15 times in 1 day just giving suggestions

Caveat emptor, next time check the site before you start, crooks are everywhere. Plus, Debit cards don't have protections like Credit cards.

some optical devices choose DVD/CD. if it fake maybe it doesnt read.  on the other hand you can try to clean its lens.

Hello,i have been reading about your problem....
If the dvd you are trying to play is a fake copy,it will not always play.... , Plus.... when you buy in a different country it also may not work.... this is due to the dvds reagons....

most older drives can't read multi session... you need to have a drive installed to be able to read multi session burn. there is no software tweak that can fix this... you need to replace the drive. otherwise burn the data as single session.

If, during the programming session, you find that you are unsure of the scanner's settings or wish to reset the scanner's configuration, use the Return to Factory Settings label available in the Programming Overview section of the above programming guides. (Note: Use this label with caution, as it will disable ALL features that may have been programmed since the scanner's installation.)