HP C6180 won't print borderless photos

If you put regular paper in the tray as it is asking does the printer use the regular paper to print the picture? If so, be sure the 4x6 photo paper tray (with photo paper) is pushed all the way in, and when you select print there should be an option (probably hidden in a submenu) to select the photo tray as the paper source. If you are printing from Adobe Acrobat, I have not found a reliable way to get the c6180 to use the photo paper tray. I hope this helps.

You have to shift the paper tray. Click on start, click on printer/faxes right click click on your printer, click on printer preferences, select photo printing borderless. This shifts your paper tray to photo paper.

Preserve your memories forever with borderless printed photographs--while saving money and time by printing from the comfort of your own home. Some printers do not have the option of printing borderless prints, so make sure your printer supports borderless printing before beginning this project.

Download your digital photo to your computer from a digital camera, email or the Internet. Save the photo to your hard drive to a folder that you can find later such as "Pictures."

Step 2Open your digital photo in a photo-viewing software. Click "Print" from your menu. Go to your printer properties to change your printer's "Page Setup." Access "Properties" through the "Preferences" or "Options" link in your "Print" dialog box. Many software programs have a default margin or border for photos; to print borderless photos, you'll have to remove the default margin.

Set the default printer driver settings to print 10 x 15 cm (4 x 6 inch) photos

1. Make sure 10 x 15 cm (4 x 6 inch) photo paper is loaded into the photo tray. NOTE: The Photo Tray light on the printer does not have to be lit when printing from a computer.
2. Click Start and then click Control Panel .
3. Click Printers and Faxes .
4. Right-click the icon for the HP Photosmart 8200 Series and select Printing Preferences .
5. On the Paper/Quality tab, select 4x6 or 4x6 with tab from the Size is drop-down menu (under Paper Options).
6. Make sure that the Source is box is set to Photo tray .
7. Click the Borderless Printing box if borderless prints are desired.
8. Click Apply and then click OK .
9. Open the software program you wish to use and set up the pictures you want to print. Make sure to select a 4x6 inch layout for the photos within the software program before you print from the software program.

Check another site. This one's useless

buddy download service pack 2
:it will fix the problem

Downloaded following program for Vista and was able to print borderless pictures on Canoni9900

Easy-PhotoPrint EX Ver.2.0.3 (Windows Vista/Vista64/XP/2000)
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=232&modelid=9870#DownloadDetailAct

wat pc do u have? are u using mac? if ur using microsoft try these:

go to ur printer and faxes - right click on ur hp printer icon - select preferences - select printer shortcut tab - select the appropriate size - the click ok. that should solve ur problem

try using a ruler to check if you have the correct paper size.
open up HP Solution Center verify the printer settings..
use borderless printing, paper size 4 x 6.

You have to push in the photo tray~. Push until you hear it click...then it will print from the print tray and in turn, you will be able to print photos unto your glossy photo paper instead of the letter size paper.