Need to sync tissot t-touch hands to digital time, and other functions

recheck battery install may not be properly seated

In this watch the battery should be changed after one year, depending on how often the features are used. After changing the battery the all reset should be done. Best to take it to an authorized service, and not any non authorized place to change the battery. Get in touch with Tissot for the info about where to bring the watch.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TISSOT watch manuals.Rate me, please

Per the manual: http://support.tissot.ch/usersmanual/140-en.pdf
When your battery begins to die, the hands are no longer synced.
After replacing the battery, go into local time mode (pressing the center of the crystal) until "Set" appears. Press the crown. Scroll to "ECO BAT", press and hold the crown for 5 seconds until "SYNCHRO" appears. Use the "+" button to move the minute hand and the "-" to move the hour hand until they are in the upright or 12:00 position.
Either press the crown again or wait until the watch automatically leaves the Set mode. Your hands should now represent the local time.

The manual will tell you how to do this. To obtain a copy type "support.tissot.ch/?mod_flashPDF/id_138" into your search engine and this should take you to the manual page for your watch.

1. Activate the Crystal.
2. Select the "units Mode".
3. Press and hold the "T" until it switched to "syncro" mode.
4. Now using the + and - move the hands to the 12 o'clock position.
5. Press "T" again to set.

Just make a "synchro"nisation, as described in the technical manual for the watch, available on Tissot's site.

The Tissot Touch watch is expected to need "SYNCHRONIZTION" periodically. (that is, to synchronize the digital and analog portions.) The Tissot manual tells how to do this. This manual came with your watch and is available online from the Tissot website.

good luck, Rodney

This is the tried and tested solution from this very nice gentleman. Many thanks to him (Ha Bi):

1. Press and hold on to the T button until it beeps
   
2. Touch the middle of the screen to change digital display to unit selection
3. Press and hold the T-button until "Synchronize" comes up in the digital display
4. Use the + button and - button to align the hour and minute hand to 12:00.
5. Click on the T-button again. Congrats, you're done!
6. Enjoy~

Must see blog for all T-touch users

http://myhabi.blogspot.com/2008/10/tissot-t-touch-battery-change.html

there are sync instruction on the manual page on the web.

http://www.tissot.ch/data/usersmanual/138-en.pdf

1. Activate the Crystal.
2. Select the "units Mode".
3. Press and hold the "T" until it switched to "syncro" mode.
4. Now using the + and - move the hands to the 12 o'clock position.
5. Press "T" again to set.