Samsung S3 Detected by Computer, but Not Samsung Media Studio?

make sure that you player is not on hold!

Dude when you connect your mp3 player to your pc then hold the usb lead or cable properly and tightly then it will work..!

Thankyou. :)

UPDATE TO THE LATEST WINDOWS MEDIA PLAYER, RESTART YOUR COMPUTER, THEN TO ADD FILES TO YOUR MP3 PLAYER, click MY COMPUTER open the drive location, open MUSIC FOLDER, drag your mp3s into that box, DONE :)

http://www.samsung.com/uk/support/search/supportSearchResultView.do?group=&group_cd=&type=&type_cd=&subtype=&subtype_cd=&model_nm=YP-S3&dType=D&mType=&model_cd=&menu=download&prd_ia_cd=&disp_nm=YP-S3

Above the sub type support page for yp-s3.
Scroll down for the exact type and select one by clicking it:
next page shows manual> software> firmware>.

Most manuals refer to Emodio but the Multi Media Studio should be
sufficient for transferring music as well.

Go here and download samsung media studio and use it to format the files to work on your phone

I think you have answered the question yourself. Change the USB cable.
If that doesn't make any difference try searching for the hardware again. Check the settings and drivers are working. Roll back the driver etc.

I have Windows XP and Media Player 10.

I had same problem with Samsung media studio not recognizing MP3 player. Here is how I fixed it. With the MP3 plugged in, I had to go into System/ Hardware/Device Manager and find the S3 driver under "Windows portable Media" and uninstall it. Then unplug and replug the S3 into the usb so that driver gets reinstalled.

Then I decided windows media player and samsung media studio are unnecessary for transferring music files to MP3 player.

Instead I go into Portable Media Devices from the control panel and just treat the MP3 player like a usb device. I copy folders of music and songs into the Music folder on the MP3. For me this is way easier than the Samsung music studio or Windows Media player.

SOLUTION FOUND!!! NO DRIVER PROBLEM ...Right click on my computer,go down to properties ..next window click the hardware tab,then click on device manager...right click and goto properties on ALL your "usb ports"...goto power management and uncheck the power saving box for every usb port,and click ok,then restart.!

Very helpful the Best Solution...thanks.
I've been trying for over a week to solve the problem with this YP-U3 and was about to return it and than I tried this and it worked....