Replace power supply

It is sound like some electric poart is not functioning have you try to go to the store where you bought it ??

Check this link for spares and tips: you need to replace the rusted poarts;
click on : washing machine repair tips

Below is a link to a useful document.

Link:

On any movin g poart that you can see or get to.

hi,
u can use the C945 NPN (emitter,collector, base configuration ) transistor in that place.
ok

i cant find it in australia, but i believe this is a listing for the correct poart, out of ohio, USA: http://shop.earcosrepair.com/Samson-Resound-Replacement-Driver-200016.htm

Your jeep is one of those thats know for bad bulb sockets...goto the local poarts store and buy the new lamp socket and replace it.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

it's not something manufacturers like you doing so they usually don't sell poarts like that, and if they did, to presuade you not to do it yourself, if would not be cost effective (compared at buying a new printer)

There is a receiver which will have a button you push, then on the bottom of the keyboard and mouse there will be a connect button you push. Push the button on the receiver first, then the connect button on the keyboard. Then do the same with the mouse.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

means not power comes to the board, check your power supply if its connected to all board power connecter.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745