I recently dropped my machine about 3 feet and it landed on its botton, but now it starts to work when you push the foot feet but then comes up and says error.
SOURCE: I have a Brother 98-Stitch
I dropped my feed dogs and when I pushed the button to bring them back up, it wouldn't work. I did discover that when you put the button back to the up position and start sewing, the dogs come back up automatically.
SOURCE: Brother sewing machine cs6000i. Less
check you tension on the top thread and see if you have it threaded the right way. Also see if the indent of your needle "the indent down by the hole on the needle" is facing the hook by your bobbin case that grabs the thread when it comes around.
Greg
SOURCE: Machine don't work.
hi there,
huming of motor means this will not run it could not start due to no tourque to induce voltage to start,since this is a brand new machine recently purchased it has warranty, go to your nearest service center and claim the warranty of this sewing machine.
regards don't forget to rate me thannk's
SOURCE: need to replace Brother CS6000i power cord
Hi! Guy at http://www.sewingmachineparts.net/ always seems to have what I need. Here are a few other sites:
http://jhittlesewing.com/sewing/catalog.php
http://www.mastersewusa.com/accessories.html
http://sewingpartsonline.com/
And finally, Brother's website: http://www.brother-usa.com/homesewing/
Good luck and let me know if this works.
Robbie
SOURCE: how to drop the feet on a brother ls2125 sewing
Not sure what you mean.
If you are referring to the feed dogs - they do not drop or disengage.
Instead, there is a cover that is used - part # XA3442-121
If you do not have a manual, you can download (free) at the Brother website.
107 views
Usually answered in minutes!
×