I hav seagate barracuda 7200 160GB sata hdd .. i am unable to start my hard disk i.e. not able to start my comp with it ... even tried making it as a slave drive.. i think the power pins of the hdd has shorted and i hav important data in drive tat i want to recover....
is there any solution to this problem...
help reqd. urgent... plzzz
I pluged my desk top into the external harddrive and now the harddrive dont work. (there is a voltage differance,) so i would like to find a new or 2nd hand board, Se No 100406534 F 7729EVAF. Can you help. The harddrive is a Seagate Barracuda 7200-10 St 3400620A.
FIRST PART OF PROBLEM, YES THE DATA MIGHT BE ABLE TO BE RECOVERED, BUT IT WILL TAKE SPECIAL SOFTWARE TO DO IT. YOU NEED TO FIND A REPAIR OUTLET THAT CAN RECOVER DATA ON A DAMAGED DRIVE. THEY CAN HANDLE THINGS LIKE THIS.
THE SECOND PART IS HARD TO READ BUT I WOULD SAY IF YOU ARE MIXING VOLTAGES ETC. YOU PROBABLY HAVE FRIED NUMEROUS THINGS. THIS IS NOT GOOD. FINDING A SECOND HAND BOARD IS VERY CHANCEY! YOU DON'T KNOW WHAT YOU ARE GETTING.THE DRIVE IS PROBABLY RUINED ALSO. YOU ARE LOOKING AT A MAJOR REPAIR, REBUILD. YOU NEED TO START TO GET EVERYTHING COMPATIBLE, SAME VOLTAGE ETC. DO NOT PLUG HARD DRIVES IN WITH POWER ON OR UNPLUG THEM WITH POWER ON. THAT WILL DESTROY THEM. THE DATA MIGHT BE RECOVEABLE ON THE ONE DRIVE, BUT IT WILL MIGHT HAVE TO BE SENT TO A SPECIAL LOCATION TO RECOVER THE DATA. THIS IS ALSO USUALLY FAIRLY EXPENSIVE SO BE PREPARED. HOPE THIS HELPS.
146 views
Usually answered in minutes!
×