Anonymous Posted on Oct 10, 2008

HP Officejst Pro L7680 All in one

My top feeder was not workign properly - I took the rollers off, the black & blue palastic peice and now that I have put it back together - the lid will not shut completely ( the blue handle it sticking up slightly & will not allow it to shut. Obviously I have not put it back together properly but can NOT find how to do so on any documentation (lid photos are not helpfful). Thanks!

6 more comments
BTyerman Nov 07, 2008

The paper roller mechanism at the top left of the machine is very poorly designed and only compounded by the lack of documentation roller and other components. After fiddling with the plastic parts I can send a fax or print a copy, but then the problem recurs. It is maddening.
Anonymous Nov 26, 2008

Our printer just wont feed through, the rollers dont drop. Its a pain in the arse
Anonymous Dec 01, 2008

same here on the lid not closing...excact same problem
Anonymous Dec 04, 2008

I took it apart and no can not put it together.
justpsgthru Jan 23, 2009

Took the rollers out to clean them because it was copying with a line down the middle and now I can't get the door to shut closed. Obviously I am putting them back wrong....HELP!!!!!!!!!
Anonymous Feb 22, 2009

It's Junk!!!!!!! I'll never buy a piece of **** like this again ! I want my money back!~!
Anonymous Feb 23, 2009

ADF is a P.O.S. and I love HP products. I guess their quality is going down hill. So far this is the only problem I am having with this unit. The ADF pulls in the paper and either tears it to shreds or it will curl it, crumble it, pull it in and turn the paper so that your image/copy is not straight. Worked great for about 6 months, now it's starting to get worse.

Hey HP, how about producing reliable products like you used to....
Anonymous Mar 04, 2009

It takes two or three attemps to get the top feed to take the paper. Have also had a problem with it not taking the paper correctly and tearing.

I have used HP printers for 20 years and purchased 4 this year. No plans to buy another HP until they start building good printers again.

JCD

1 Answer

Anonymous

Contributor 1 Answer
Posted on Oct 24, 2008

Anonymous

Contributor

Joined: Sep 03, 2008

Answers

Questions

Helped

539

Points

HP Officejet Pro L7680 All-In-One Printer

Printer gives repeated "clear paper jam" messages and even though there is no paper anywhere in the paper path it will not clear.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

The stack stopper on my HP L7680 All-in-One printer came off. How does it go back on?

There is a flimsy cover that poorly snaps in above roller ADF assembly of the HP L7680 when it is in its normal operating position. This cover is the one that covers the blue release button. The stack stopper hangs from this small black plastic cover via the two round pegs on end of this cover and floats up and down between the two rollers. Really amazingly flimsy design. Oddly enough when assembled correctly it works.

Read full answer

Aug 03, 2012 • HP Officejet Pro L7680 All-In-One Printer

1helpful

1answer

Hp Officejet pro L7680, document feeder not working, need help.

I cleaned the feed rollers on my document feeder with alcohol and cotton swabs and its been working great ever since, Try that first if you can get to the rollers. I would not try it with the power on though unless tou are very careful

Read full answer

Feb 25, 2011 • HP Officejet Pro L7680 All-In-One Printer

1helpful

2answers

I have a HP Officejet Pro L7680. When I feed docuent from the top feeder the copies have a black line down the right side about two inches from the edge of the paper. If I lay the document down on the...

Hi,

Please follow the below web link steps to reslove the issue, if the issue persists, I request you to visit the nearest service center.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01895544&cc=us&lc=en&dlc=en&product=2512009

Read full answer

Jul 29, 2010 • HP Officejet Pro L7680 All-In-One Printer

0helpful

2answers

We had a paper jam. In the process of clearing the jam we ended-up with one blue part (c7309-40152) that we can't find its proper location. Would you tell us where it goes?

That number is for a paper feed roller so it has to go in where the paper is picked up. You should see a small shaft to install it on.

Read full answer

Jul 22, 2009 • HP Officejet Pro L7680 All-In-One Printer

0helpful

1answer

The top feeder of my printer is not allowing papers to go through

Pull the feeder up to open and look for obstructions. Clean the roller and pad with isopropyl alcohol.

Read full answer

Jun 16, 2009 • HP Officejet Pro L7680 All-In-One Printer

0helpful

1answer

Papers get stuck

Clean the feeder rollers with WD-40

Read full answer

Jun 16, 2009 • HP Officejet Pro L7680 All-In-One Printer

0helpful

1answer

The top feeder gets jammed = seems to be a problem with the blue

Open the lid and clean the rollers with Isopropal Alcohol.
It should also be under warranty!

Read full answer

Jun 16, 2009 • HP Officejet Pro L7680 All-In-One Printer

0helpful

1answer

HP office jet feeder won't work when trying to fax

the little pieces of plastic are the sensor flags which is why it will not feed, those are required to let the machine know that the paper is present in the feeder. No flag no feed. Look at the plastic thing try to figure out where it goes in the feeder if you look close, you will see a spot where they go.

Read full answer

Apr 08, 2009 • HP Officejet Pro L7680 All-In-One Printer

1helpful

2answers

Looking for HP L7680 Manual. My top roller fell apart and i do not know how to put it back together again. kind of like humpty dumpty. Any help would be appreciated.

You can download the manual here:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=2512009&lang=en&

Read full answer

Mar 26, 2009 • HP Officejet Pro L7680 All-In-One Printer

3helpful

1answer

Top feeder won't work properly

hello!

have you tried cleaning the separator pad inside the automatic document feeder?

try to Load one or two sheets of unused plain white full-size paper into the document feeder tray, and then press Start Copy Black to pull the pages through the automatic document feeder. The plain paper releases and absorbs residue from the rollers and separator pad.

If the problem persists, clean the rollers and separator pad manually

Read full answer

May 07, 2008 • HP Officejet Pro L7680 All-In-One Printer

Not finding what you are looking for?

View Most Popular

Officejet Pro L7680 All-In-One Printer

Office Equipment & Supplies

The stack stopper on my HP L7680 All-in-One printer came off. How does it go back on?

HP Officejet Pro L7680 All-In-One Printer

549 views

Ask a Question

Usually answered in minutes!

Check Out the Latest Printers Report

View all Fixya Reports

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

. Officejet Pro L7680 All-In-One...

Officejet Pro L7680...

Have a manual for HP Officejet Pro L7680 All-In-One Printer? Or just drag it here!

Related Topics:

HP Officejst Pro L7680 All in one