Samsung LN-T4061F 40 in. LCD HDTV Logo
Posted on Sep 21, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

No signal or weak signal

By cstewart5000, posted on Sep 21, 2008 My grandson pushed a botton on our remote. My husband tried to fix it. I can not get a picture at all now. I get the error message no signal or weak signal. Is there a way to reset the tv and let it reload? I've unplugged it and disconnected the cable over night thinking it would let me set it up again.

Answer This Question
  • 1 more comment 
  • cstewart5000 Sep 22, 2008

    I was able to find help by downloading a owners manuel. I fixed the problem!

  • lowted Feb 20, 2009

    Have a Samsung LN 32A450CID

    Connected a DVD player and the following error message appeared: "Weak signal no signal"

  • Anonymous May 11, 2010

    Need the model of the TV and the Make ... 1st

    2nd do you have a cable box and what is your provider?

    Happy to assist

    LB

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 2 Answers
  • Posted on Nov 18, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Nov 18, 2008
Answers
2
Questions
0
Helped
16272
Points
26

  1. Since my problem (Samsung/Comcast) began with a channel selection button pushed on the TV remote when it should have been pushed on the cable remote, I figured the problem lay with the TV.  Although I was getting the "weak or no signal" msg., the actual signal strength displayed as strong. Disconnecting did no good. I surmised that the box was simply not recognizing the TV.
  2. I looked at the manual for my Samsung 750 model. 
  3. Page 20 discussed "Selecting the source". I accessed the TV menu and selected "Input", then chose the "HD..." item from the highlighted list. Voila! My husband will be so proud of me when he returns from hunting camp.

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Expert 84 Answers
  • Posted on Sep 21, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 19, 2008
Answers
84
Questions
0
Helped
28025
Points
238

Sorry I see the model,
hold the Menu button on the TV (not on the remote) down for three seconds.
Note: Shop Mode is activated in the same manner: Pressing and holding the Menu button on your TV for three seconds. To avoid accidentally setting your TV to Shop Mode, avoid pressing and holding the Menu button on the TV for three seconds or more.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a bose tv speaker system. I have not used it in awhile. I cannot seam to get it working. the red light is on the remote device that sets under the tv.
Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Read full answer
Dec 14, 2016 • Bose Televison & Video
0helpful
1answer

No display and all push botton switch not function
Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.
Read full answer
Aug 07, 2015 • Televison & Video
0helpful
1answer

Soniq qv420ph no display
It sounds that the start signal does not comes from its main digital board to its main power regulator board. There is nothing a user can do with this fault. It will be best to contact any service technician. If you wish to get some details, http://electronicshelponline.blogspot.com/ Pull up older posts.
Read full answer
Dec 17, 2013 • Televison & Video
0helpful
1answer

I was watching t.v. my grandson called then i looked at the t.v. and it said no signal. i have tried unplugging it and turning it back on. i have changed the batteries in the remote control. nothing...
This seems to be due to the TV being on the wrong input. Use your Vizio remote and cycle through the inputs until you reach the audio inputs. Try all of them with the receiver on and the amber,green and blue lights on the receiver. If you do not see a picture here the TV may have been connected by coax. To check this go to th TV input using your Vizio remote and key in 03 or 003. You should be able to see satellite now. It will also depend on how your system is a connected to your peripherals if you have any connected.

Hope this solves your issue. Thanks for using FixYa.com.
Read full answer
Sep 30, 2010 • DISH Network 322 DTV Receiver
0helpful
1answer

My grandson was watching an old VHS tape and pushed something. Now, all I see when I turn the t.v. on is "counter00.00" and then the t.v. shuts off in about 3 seconds. I have lost the owners manual. HELP!
Left up the VCR tape gate,see,if the tape still in there?Yes,unplug,10 mins.replug the Tv and push the tape forward botton.Let the tape go forward about 5 sec. eject the tape take out.Grandson probally rewind the same seen to many times,causing power power shotdown mode.
Read full answer
Aug 09, 2010 • Symphonic SC3813 13 in. TV/VCR Combo
0helpful
1answer

My husband played with the remotes so now our Samsung shows with a banner of "Weak or No Signal" what do I need to do to get Comcast back?
Your Samsung is in "broadcast" mode.
On the remote, press the "source" button once... twice...until you get to the Comcast input.
Read full answer
Oct 11, 2009 • Samsung TV Remote Control
1helpful
1answer

GARAGE CONTROL SYSTEM
Try holding the hand held remote up next to the homelink (built in remote). Hold down the botton on the hand held remote and the botton you want to program in the car at the same time until the homelink light goes out. This could take 60 seconds or more. Now depending on which model garage door open and how old it is you may need to program the car to the opener. Usually this is done by pushing the botton on the back(Liftmaster,Sears, Chamberlin) or the botton on the front(Genie) and then go to the car and push the same botton on more time. I hope this helps.
Read full answer
Feb 05, 2009 • 2005 Honda Pilot
0helpful
1answer

Troubleshooting vcr
Usually one connects a RF [cable tv, Dish tv, antenna ] cable to the INPUT of VCR & a RF cable output to tv (antenna )INPUT .The reason is that if you are watching TV reception (Cable, Dish, etc) and you want to watch VCR tape, just push the tape in and it should start playing picture.
From what I understand that you are trying to say:: [ YOUR NEW TV ! ] you MUST connect to the RCA jacks, CABLE S with RCA plugs that come out of the VCR to the new TV [ INPUT & OUTPUT] jacks .When you ["" use input botton on VCR remote"" ] you are using a DIFFERENT input signal. You are not letting the TV know that you are changing the signal from RF(antenna, Cable, Dish,etc)to the RCA signal ["" I use my input botton on my vcr remote""]
Read full answer
Aug 14, 2008 • Televison & Video
38helpful
3answers

Weak or no signal message
  1. Since my problem (Samsung/Comcast) began with a channel selection button pushed on the TV remote when it should have been pushed on the cable remote, I figured the problem lay with the TV.  Although I was getting the "weak or no signal" msg., the actual signal strength bar graphic showed it to be strong. Disconnecting did no good. I surmised that the TV was simply not recognizing the box.
  2. I looked at the manual for my Samsung 750 model. 
  3. Page 20 discussed "Selecting the source". I accessed the TV menu and selected "Input", then chose the "HD..." item from the highlighted list. Voila! My tv works again. 
Read full answer
Jun 08, 2008 • Samsung LN-S4092D 40 in. LCD HDTV
0helpful
2answers

Phillips Magnovox Television
This is how I fixed my problem:

http://www.seveyeng.com/collective/tv_gray_screen.shtml
Read full answer
Feb 15, 2008 • Philips Magnavox 27MS343S 27" TV
Not finding what you are looking for?

View Most Popular

LN-T4061F 40 in. LCD HDTV

  • Televison & Video

Related Question

I have a bose tv speaker system. I have not used it in awhile. I cannot seam to get it working. the red light is on the remote device that sets under the tv.

  • Bose Televison & Video

Related Topics

1,025 views

Ask a Question

Usually answered in minutes!

Popular Questions

No picture

Samsung LN-T4665F 46 in. LCD...

Will not turn on or off

Samsung LN-S4051D 40 in. LCD...

Sound no picture, which component is tcon board? where all audio/video/cable/hdmi plug in to?

Samsung LN-S4692D 46 in. LCD HDTV

No Picture - Samsung LN-S4692D 46in HDTV LCD

Samsung LN-S4692D 46 in. LCD HDTV

Samsung LCD tv - Turns on and off by itself.

Samsung LN-R3228W 32 in. HD-Ready...

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. LN-T4061F 40 in. LCD HDTV Manual

LN-T4061F 40 in. LCD...

Loading...