Ring Not all of my phones ring

We have two phones KX-T7731 (Main phone) + KX-T7020 in another office. We talking on phone and another call comes in it use to ring on the spare phone. Now it does not ring until 4th ring and goes right into answering machine. It use to ring on second ring. Is there a way to program phone to ring on second phone after second ring?

just check your ring tone settings check whether u have selected vibrate then ring settings..if so change it to ring..try this....

Hello,

I believe the ringer volume is low or at minimal or turned off, that's why you don't here any ring. Try this; press the arrow (left and right or up and down button) on the phone constantly. This should increase the ring volume if actually it is low. Or, call the phone with another line, while the comdial digitech 7714s is ringing and press the arrow buttons without picking up the phone.

Try this as well;

1. Press optionS
2. NEXT (twice)
3. RING
4. Then UP or DOWN to choose a ring tone
5. Press SPEAKER to set.

Let me know if this doesn't work, so that I may direct you further.

Good luck.

This is set on the buttons for the phone from within the system programming. Individual buttons can be set to NO Ring, Ring, Ring Continuous, Delay Ring, or Delay Ring Continuous.

Continuous meaning that even if you are on the phone, it will ring audibly on your phone. If it's not set to continuous, it will only give a blip.

You should contact your vendor for assistance in setting this up.

1.) Are you refering to outside lines ringing?

2.) What if someone dials you on intercom does it ring then?

If #1 the phone SYSTEM usually has an option that you have to program and add you to the ring pool for the outside lines.

If #2 does not ring it is also a function to disallow ring, but it very well could be the phone. Since the line is all that matters and NOT the phone, you could try another phone at your location and see if the same happens. If it does, you will need to program the SYSTEM from either Ext. 10 or 11 to add you to the ring pool and allow ring.

Usually on the wireless phone their is a button to adjust the volume. It may say loud ring or soft ring. Or ring on or off.

Look for a setting that changes the ring from vibrate to ring. It's a setting different from that of ring volume.

To here ring types hit speaker then 711, then 1 for internal rings (select 2 for outside ring selection) then 1-8 the ring type.
To set ring type hit speaker then 720 (follow all the steps above).

is because the ringging assignment only set to ring at receptionist phone.
u may need contact the phone provider to set the ringging assignment to other for other phone which to ring for incoming call

you can try to plug it in at a set that does ring and make sure it wokrs there. The programming should not have changed with the phone but ... anything is possible. If it rings at the other location then it will be the programming for that extension. Also check that it is not in DND do not disturb