20 Most Recent
Westell Wirespeed LiteLine 6100 (B9961001002) Modem - Page 9 Questions & Answers
What is my SSID #
The SSID is the router's wireless network name.Network security keySome later model wireless routers have the Password(ie.Encryption key) and the SSID already configured in the wireless router andthis information is printed on a label on the bottom of the router.These settings can be used to configure the wireless card and wireless adaptersin your computer/laptop. If these settings do not suit you, then it can be changed to suit yourrequirements. The encryption key secures your data and wireless connection from unauthorizedaccess.To configure the wireless settings in the router, connect a LAN cablefrom your computer to the wireless router, then open a Browser on your computerand enter the router's configuration IP address, then enter the admin login andpassword and then go to the wireless settings and configure the SSID andEncryption key.The router's encryption key can be a Passphrase or the WEP or WPA or WPA2key.If you use the Passphrase method select either WEP or WPA or WPA2 togenerate the encryption key. You can enter the WEP or WPA or WPA2 key with 8 to63 ASCII characters or 64 Hex digits.Most people use Passphrase which is easier to remember eg. I was born inJanuary 1988.The strongest and latest security is WPA2, the weakest and oldest is WEP. To connect to your wireless router from the computer/laptop,configure the wireless card in your computer/laptop with the router's wirelesssettings ie SSID, plus the WPA or WPA2 encryption key. Then computer/laptopscan communicate with your wireless router.
http://www.fixya.com/support/r10267861-network_security_key
4/28/2012 11:06:22 AM •
Westell...
•
Answered
on Apr 28, 2012
I'm trying too install the
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.
8/26/2010 6:25:16 PM •
Westell...
•
Answered
on Aug 26, 2010
How can I configure Dynamic
First connect your router to computer with ethernet lan cable.
Then you can access it with following link.
http://192.168.1.1
or
http://192.168.0.1
If you are not able to access it with above ip then check your computers ip and gateway ip is your router ip access router with it.
Then it ask for user and password.
Type user as "admin" and password as "admin" orblank or "password"
Then you can see configuration page of router.
Then configure DNS settings in wan settings as dns ip get automatic from internet service provider.
Then save settings and restart router.
Let me know if you need further assistance.
Thanks for using FixYa.
8/13/2010 8:12:25 PM •
Westell...
•
Answered
on Aug 13, 2010
Linksys router and Westell modem are not talking
Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for more information about the routers and network
3/14/2010 6:20:54 PM •
Westell...
•
Answered
on Mar 14, 2010
I got it thru Verizon (Westell Model num.
You are trying to open the NAT on the router for X-box.
For this you will need to reduce the MTU settings on the router to 1365.
You will also need to trigger some ports on the router.
For this you will need to open the router set up page.Router set up page is the page where you can change the settings of the router
Click Here to know more about router and network
1/16/2010 1:50:19 AM •
Westell...
•
Answered
on Jan 16, 2010
How do u raise the mtu
using your computer connected to the router log onto the router configuration page and change it in the settings. to access most routers you need the ip typed in the address bar of your internet browser, usually something like " 192.168.1.1 " you will then most likely need a username and password to log on. The default username can be found in your hardwares manual or website
1/7/2010 11:02:46 PM •
Westell...
•
Answered
on Jan 07, 2010
I can't connect to my
Make sure your broad band cable connected properly to modem and cable is work fine.
Reset your modem to factory defaults.
Press RESET button it is in back side of modem.Hold that RESEt button for 10 seconds then check.
There should be issue with your broad band cable .Remove that cable jack and try with new jack.
Let me know if you need further assistance.
Thanks for using FixYa.
12/7/2009 4:59:06 PM •
Westell...
•
Answered
on Dec 07, 2009
It says I'm connected but
Click on start and then "run" and type in cmd.exe
When the window comes up, type in ping
www.verizon.net
If you are connected to the internet, you will see a reply from that website (4) times. If you are not connected to the internet, it will say no repsonse.
Go to accessories, then communications, and click on new connection wizard. That may get the internet pages working
9/24/2009 5:26:46 AM •
Westell...
•
Answered
on Sep 24, 2009
CANT GO ON MY IPOD USING MY ROUTER
Have you configured the WESTELL router to set a "SSID", and to "enable" its wireless services?
It should not matter which ISP (COMCAST, QWEST, ROADRUNNER) that you are using -- it's strictly a problem between your iPod and your router.
9/17/2009 8:25:15 PM •
Westell...
•
Answered
on Sep 17, 2009
Westell modem is acting as router, but i need
The quickest and most painless way to do this is to call Verizon or whoever supplied the DSL modem and have them talk you through it. You need your account info and master password...or they can reset it if you know enough info about the account name. Then, they will turn it into a bridge for you
Carl
7/14/2009 6:52:37 AM •
Westell...
•
Answered
on Jul 14, 2009
How to Install YouTube DL.py to Download YouTube Videos to my PC?
Actually, you just need the help of a YouTube Downloader. If you still need help, why not try this YouTube/Video Downloader?
Leawo YouTube Downloader acts far more than a single online video downloader to download YouTube videos and other online videos from various video sharing sites like Facebook, Dailymotion, AOL, iFilm, Myspace, Dailymotion, etc. Besides the ability to download online flash videos, this FLV downloader could also acts as video download accelerator to speed up online video downloading, video accelerator to speed up video buffering for smooth playback, video player to play back videos, and IE browser to browse online videos for free downloading. It could extract audios out of online videos, like converting YouTube video to MP3.
Hope it can be another choice for you or other users. :)
Watch online videos offline freely with Leawo YouTube Downloader
What is digital marketing?
Digital marketing, or “online marketing,” is a form of advertising that uses the internet and digital technologies to connect with customers. Digital marketing seeks to accomplish the same thing as traditional marketing except by leveraging computers, smartphones, and other digital devices rather than traditional media, such as print, radio, or television.
Not finding what you are looking for?