20 Most Recent Crosman (4032) - Page 6 Questions & Answers

Crosman bought out benjamin / sheridan, and they still repair just all their pump guns. The ring sounds like a piece of a pellet, the barrels are silver soldered to the bottom tube, Not lead. Also, the repair kit should not have too many parts, you can only go so far with those guns before needing special equipment to get them apart. Get a hold of Crosman and tell them that benjamin sent you a bad part. They should fix it.
I had an old Benjamin Franklin in .22 cal, it was just a brass tube with a stock and barrel. I sent it to them, to be repaired, and I wanted the .22, because I had the 5mm and the 177. So I got it back, cost $29, New barrel, in .177, soldered on, new guts, new paint, trigger, bolt, the works.. Brand new gun. I told them I wanted the brass and I wanted the .22, They said oops, sorry. I didn't complain, nice old gun. Hope this helps.

I don't know about the co2 guns, they usually replace them with a later model. The old pumps can still get repaired. I think crosman bought out benjamin/ sheridan, or was it the other way. anyway, they still make the repairs. I don't have their number in front of me, but you should be able to google them.

Open the pump arm (fore stock) all the way and check the rubber O-ring for cracks. If it's just dry, get some Pellgunoil® Lubricating Oil or the equivalent from a gun/sporting goods store and oil it.

up where u put the clip in, u gotta take out a little silverish piece out. then pull on it and the inside should come out of its metal container. then simply unscrew the screws. the winder u shud be carefull taking apart. it will easily come apart. if this doesnt work(which it didnt for me) u can CALL crosman and order a clip for like 10 bucks including shipping. hope this helps

take the gun put in in a card board box and BURN IT!!!!!!!!!!!!

if u have a cleaning rod that will help

ummm if the triggers not on you are screwed

veryy

the o-ring is missing, it is a little seal for the co2 by that green area

A scope on a shotgun are you funny in the head? Its a Cqb weapon not a marksmens rifle. You wont find a scope for a shotgun ever.

Hi there Click the link & get the manual
LINK

Thanks.

go to the crosman site for a parts breakdown.

http://www.crosman.com/airguns/service/manuals/crosman-rifles

try visiting www.uttings.co.uk they have most crossman accessories

Tim at Mac 1
http://www.mac1airgun.com/

I went straight to the Crosman website and retrieved the manual for free. Thanks anyway.