Top 20 Palm Treo 755p Smartphone Questions & Answers

Try taking it to the nearest maintenance

could you explain what the problem is, that doesn't make much sense to me

pls bye me

"rom Image" is reffering to the operating system on the phone, this is common when rooting android phone but not sure on treo, check treo website for "rom update" may have to plug ur phone into your computer to doit. hope this helps

you can tr y a cold restart (erases all info on machine but it may delete whatever is holding it up. for directions on a total reboot http://www.notsofaqs.com/faq_pg17.php

enter the language you want, then follow instruction...John

Thank you for the information. Here is how to disable the Verizon data network without affecting your calls:

1. Goto Preferences ---> Network -----> Disable Internet Options.

If this does not work please let me know. There is one other work around that you can try.

Hi there if you can access the manufacturer website you should download the software available for your device, this should solve the problem.Simply go to the website and look for your model of palm and follow the steps.

you have to hardreset your phone it will wipeout your all the data. but it will work
1. Disconnect the Treo from a charger or USB cable.
2. Remove the battery cover and take out the battery.
3. Press and hold Power/Endwhile you insert the battery.
4. When the screen lights up with the logo appears, releasePower/End.
5. Press Up when the Erase all data? prompt appears.
6. Press Up to confirm the hard reset.
7. Go through the steps of setting up the device again by picking a language and calibrating the stylus.


Now your Treo 755p is hard reset.

0000

That is your mic. It is supossed to sit on the bottomleft side of the green board.

it is a problem with the display IC of your mobile , not with the screen . its minor and a warranty will cover it up . or if u don't have the warranty get it repaired at a local mobile store.

what activity

take the battery out. press the red button down and without releasing it, put the battery back in while still holding the red button down. It's a little awkward but works.

Hello.

Sounds like the screen last seen at the factory. Hopefully, you have a recent backup. I'd suggest you do a hard reset, which will wipe out all the data on your Palm. Then, restore the data.

To perform a hard reset:

Remove the battery cover from the unit. While holding the power button down, remove the battery, replace the battery and then remove again. When the 'Access Powered' screen appears, release the power button. The phone will then prompt you with asking if you wish to erase all data or not. Choose Yes to erase data. The phone will then proceed to reset itself. Once this process is done, you will be prompted to set up phone like new. Now, sync your phone to receive your contact information, settings etc.

Hope this helps.

This sounds like one of your databases is corrupted. EAS is supposed to disable syncing calendar and contact syncing via cable.
Try doing a cable sync disabling each conduit one at a time to determine which database is corrupted.

looks a loose contact between display and pcb.

takie out the batters then put them back in.

find its menu (you may know batter) go to setings than security than restore factory setings if does'nt solves switch off your cell remove battery and keep remain the situation for 24 hours you may sure get sucsess

in alaram setting keep alaram all the day so you can get the alaram daily