Sony Network Walkman NW-E005 MP3 Player - Answered Questions & Fixed issues

ok get i tunes and start from there then when you got your music downloaded to itunes go to the i tunes folder on the hdd and all your music is there to put onto your sony walkman

hi

my sony player is fail because i am not work it because one error i will see this is

NO DATA please sol my problem help me

my email addresss: [email protected]

[email protected]

If you are using windows check the drive size. Also change the window settings to show hidden files and folders and operating system files. It might be you have back up files from what you had on before.

http://www.taringa.net/posts/musica/16987560/SonicStage-4-3-Full-sin-internet-Espanol-Skydrive.html

mp3 generally have a LiPo battery inside. when you left the mp3 on the computer, you probably overcharged it! look if the battery of your mp3 is swelling or not(if at all you are able to open it). now the point is, don't charge it any further or there are chances of the battery exploding. immediately get a NEW LiPo battery along with an appropriate balance charger and use them.

The player doesn't accept removing of music, or formatting, when it is not done from SonicStage, the software that sony offers with it.
The software is to be downloaded here. When you've installed the software, format the player from the menu (all your music will be removed, so you might want to copy it to your pc first). Then transfer your music with this program.

Please rate if this solution helped you out.

you can't you can only use software SonicStage to transfer tunes

Find a media player, such as Rhapsody or WMP12, and connect. Your player, if configured correctly, should be seen by the player and transfers can commence.

actaully i bought ipod one month past........by mistake i formated my sony walkman NW-E005 512 MB MP3 Player now i get format error and if i copy songs then message show no data what can i do please help me to resolve my problem Thanks

If you are using Windows Vista in laptop, you need updated sonic stage software version 4.3 and its available on Sony Support for free.

This is possibly a driver problem or a faulty connection leadconnect your walkam to your computeronce its connected the hardware wizard should start if not you might have to install it manually

click start control panel administration tools computer management device manager scroll through all of your devices

if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver

if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver if you computer came with a motherboard disk the drivers could be on ithope this helps

my walkman is not start ?

these units aren't meant for disassembly only for replacement.

I HAVE A SONY N50 DIGITAL PLAYER... buy when i play it says no data what can i do to become it to normal mode

That's not good. If your batteries are full, I would have to lean towards the LCD burned out either from water or vibration... it's really hard to tell without looking at it. If there is a way to reset it, I would try that first, by removing the batteries for a few seconds. If that doesn't work I would take it apart and see for my own eyes what if anything is going on inside, on the circuit board. I could look at it for you. Find me at http://NerdForce.us

I had that same problem with my, I just got a new one, I got a refurbish one it works great 4 $33 online

Hi alive23...
Delete your playlist the easy way...
Try this solution to your problem
-----------------------------------------------------------------------------------------------------------------------------
BIG WARNING: DO NOT DELETE THE FILES NEEDED TO OPERATE YOUR MP3 PLAYER.
Hook up your mp3 player to your computer
Go to your desktop and double left click on "My Computer"
When it opens you will see listing that says "Devices with Removal Storage" your mp3 player should be listed there.
Right click on your mp3 player, and a window will open, right click on "Open" and now your files/songs should be visible.
Hold the left click down and drag it across all the files/songs that you do not want this will highlight the files/songs you do not want, release,right click and then click on "Delete"
Now you mp3 player should be clear of the files/songs you do not want.
ONE MORE BIG WARNING: BE CAREFUL AND DO NOT DELETE THE FILES NEEDED TO OPERATE YOUR MP3 PLAYER.
Please take time to rate me thumbs up

dice no data quiero la data

install new firmware from usb and factory reset

I'm sorry that the Network Player is displaying the error message. Usually, the error message appears if you use the Computer to format the player. In order to resolve the issue, please format the player using the format option from the Menu items on the Player.

Please follow the below steps to format the player using the Menu options.



If the issue persists, service may be required. Please click hear to locate your nearest service facility:

Thanks for understanding. Please let me know if you require further assistance..