20 Most Recent
MSI PM8M-V Motherboard - Page 9 Questions & Answers
I lost my cd for
You can download the device drivers from this WEB site.
http://www.nodevice.com/driver/company/Microstar/Motherboard.html
Vga is not working my
Mabee the hard drive has failed . try entering bios and see if the hard drive is recognised .If not try turning the computer off unplug it then reconnect the drive data cable and power cable
then re- start the computer and see if it is recognised. some models of older hard drives needed a driver installed during set up -- you usually have to put the driver on a floppy disc and hit the f6 button when prompted by windows set up to install third party drivers . I hope this helps
Sata hertdissk
welcome to FixYa!
here is what you do
1.unplug the power of your hard disk from main board
2.try to use another power cable from the board to your hard drive check if it isn't loose connection
3.then switch the SATA cable in any two middle ports of your board ,, not lower or upper.
4. start PC and enter into bios . check in drive configuration that is your hard disk being detected by the main board or not , if it detects and shows your hard drive space e.g MAXTOR S2154213 500GB
then restart system and do your work ..
i hope you would comment if your problem is solved or unsolved ,, comment here ill help you .!
Pc audio driver
There is a driver package available on the MSI website, just click the little blue icon to the right of screen
located here:
http://msi.com/service/search/?kw=pm8m-v&type=product
I hope this has been helpful
How much hdd supported by
From support website I see this mainboard has 2 IDE connections. This means that you can connect up to 4 IDE devices and you can choose to have four hard drives or three hard drives and a burner ecc.
I need driver display motherboard
Hello,
Try the Vista driver on MIS website. Because of the age of the motherboard they will probably not release Windows 7 drivers for this product.
http://www.msi.com/product/mb/PM8M-V.html#/?div=Driver
How to disable on board video
Press Del while the Press DEL to enter SETUP message displays on screen after powering on the computer. This will load your BIOS. From there go to the video tab and highlight "on board video" and set it to disabled.
Note: you must have a video card if you disable your on board video on your motherboard.
Not finding what you are looking for?