The error is Data transmission error between the system control section and printer control section.
May be these are the problems: Look around it:::
>>Don't waste your time with Service Mode. All you need to do is take out the ink cartriges while computer is on (it will now start blinking cartrige jam) turn off printer & turn on again. Place cartriges back & press stop/reset button. Then turn off & turn on again and printer is back on line. No more flashing orange.
>>The data cable that attaches to the printer head is also attached to the back wall - make sure it is firmly attached and if not take it off and redo it/ Solved the error message instantly..
it is a communication problem between scnt system board and pcnt print control board. It can teardown and rebuild in 20 minutes. the waste ink tank is not a tank it is a strip of sponge material in the bottom of the printer. the printer calculates when it should be full based on how many print jobs vs your ink useage. the clear codes should have solved the problem on most printers. the part is listed as replaceable canon part #QA4-0662-000. the canon website has a phone number for replacement parts.
Hope this will solve your prblm
All the best
123 questions posted
Usually answered in minutes!
427 Questions
315 Questions
121 Questions
111 Questions
81 Questions