Sony FD Trinitron WEGA KV-36FS120 36" TV - Answered Questions & Fixed issues
Sony KV blinking red light
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
https://elektrotricks.blogspot.com/
http://electronicshelponline.blogspot.com/
Type in the brand name of your device [exclude the model number] at the search box at the right column to get gathered related posts.
Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.....
3/27/2022 1:45:25 PM •
Sony FD...
•
Answered
on Mar 27, 2022
•
597 views
My sony tv has sound but no picture and red light keeps blinking
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
https://elektrotricks.blogspot.com/
http://electronicshelponline.blogspot.com/
Type in the brand name of your device [exclude the model number] at the search box at the right column to get gathered related posts.
Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location
3/27/2022 1:47:34 PM •
Sony FD...
•
Answered
on Mar 27, 2022
•
1,768 views
I have a 1997 soney tv turns on but red light flashes 6 times i have replaced the lamp but still does not turn on
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
5/27/2016 7:18:53 AM •
Sony FD...
•
Answered
on May 27, 2016
•
85 views
Continuous flashing red light on sony trinitron television
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
5/21/2016 7:57:06 PM •
Sony FD...
•
Answered
on May 21, 2016
•
1,170 views
Why is it going black every 3 seconds then back on in 3 seconds?
Check and replace damaged component/s at its horizontal scan output section circuit.Check the LOT (Line Output Transformer) too for damage.Replace the horizontal scan output transistor.Check the input voltage to LOT.If the voltage is absent check the feeder resistor; if any.If you wish to get some details; check the site linked here.Surf the site with patience.Pull up older posts.
http://electronicshelponline.blogspot.com/
Type in this key phrase
" my service table today " in the search box at the top right of the display window, to get gathered some pages which has the details of practical experiences to the author of that site.
9/18/2015 6:13:36 AM •
Sony FD...
•
Answered
on Sep 18, 2015
•
100 views
Why doesn't it show full screen?
When you unplugged it you removed power and the memory setting for full screen was wiped out. Go into your menu for screen size controls, reset, and all should be fine.
9/7/2015 1:38:27 PM •
Sony FD...
•
Answered
on Sep 07, 2015
•
150 views
Small screen inside of screen
I think you might be referring to what's called, 'picture in picture (PIP). Its a feature of the TV that allows one to see what is on other channels while your current channel stays on the screen. Refer to your manual of how to disable, or if no manual, play with the remote to see what button eliminates it.
2/18/2015 2:36:13 PM •
Sony FD...
•
Answered
on Feb 18, 2015
•
112 views
Sony tv model # kv36fs320 no picture sound is
The power seems ok as it was working fine this morning had kids channel on for my daughter for about 1-2 hours while I was pottering about cleaning then daughter told me TV had gone black
12/7/2014 9:16:05 AM •
Sony FD...
•
Answered
on Dec 07, 2014
•
534 views
Turn on tv went black left line in middle horazontal
vertical circuit is out, some component failed. turn it on and when the line comes on hit the top of the case with the flat of your hand, if the line fluctuates or goes away you have a bad solder connection on the circuit board. if it doesn't make any difference when you smack it then something has failed completely. no user repairable parts inside.
9/26/2014 2:09:14 AM •
Sony FD...
•
Answered
on Sep 26, 2014
•
67 views
Sony FD Trinitron blink codes
If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
9/25/2014 10:26:52 AM •
Sony FD...
•
Answered
on Sep 25, 2014
•
402 views
How to fix tv cannot turn on
Check power cable, power switch button, fuse, fusible resistors, power regulators and all those components in primary power supply circuit.
8/17/2014 6:42:28 AM •
Sony FD...
•
Answered
on Aug 17, 2014
•
49 views
Not finding what you are looking for?