Top 20
Sony FD Trinitron WEGA KV-36FS120 36" TV Questions & Answers
Sony KV blinking red light
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
https://elektrotricks.blogspot.com/
http://electronicshelponline.blogspot.com/
Type in the brand name of your device [exclude the model number] at the search box at the right column to get gathered related posts.
Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.....
1/24/2018 11:36:03 PM •
Sony FD...
•
596 views • 0 helpful votes
Continuous flashing red light on sony trinitron television
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
5/21/2016 5:27:13 PM •
Sony FD...
•
1,170 views • 0 helpful votes
I have a 1997 soney tv turns on but red light flashes 6 times i have replaced the lamp but still does not turn on
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
5/26/2016 5:18:50 PM •
Sony FD...
•
85 views • 0 helpful votes
Why doesn't it show full screen?
When you unplugged it you removed power and the memory setting for full screen was wiped out. Go into your menu for screen size controls, reset, and all should be fine.
9/7/2015 1:01:22 PM •
Sony FD...
•
150 views • 0 helpful votes
Why is it going black every 3 seconds then back on in 3 seconds?
Check and replace damaged component/s at its horizontal scan output section circuit.Check the LOT (Line Output Transformer) too for damage.Replace the horizontal scan output transistor.Check the input voltage to LOT.If the voltage is absent check the feeder resistor; if any.If you wish to get some details; check the site linked here.Surf the site with patience.Pull up older posts.
http://electronicshelponline.blogspot.com/
Type in this key phrase
" my service table today " in the search box at the top right of the display window, to get gathered some pages which has the details of practical experiences to the author of that site.
9/17/2015 11:54:31 PM •
Sony FD...
•
100 views • 0 helpful votes
Small screen inside of screen
I think you might be referring to what's called, 'picture in picture (PIP). Its a feature of the TV that allows one to see what is on other channels while your current channel stays on the screen. Refer to your manual of how to disable, or if no manual, play with the remote to see what button eliminates it.
2/10/2015 7:48:04 AM •
Sony FD...
•
112 views • 0 helpful votes
Turn on tv went black left line in middle horazontal
vertical circuit is out, some component failed. turn it on and when the line comes on hit the top of the case with the flat of your hand, if the line fluctuates or goes away you have a bad solder connection on the circuit board. if it doesn't make any difference when you smack it then something has failed completely. no user repairable parts inside.
9/24/2014 8:37:02 PM •
Sony FD...
•
67 views • 0 helpful votes
How to fix tv cannot turn on
Check power cable, power switch button, fuse, fusible resistors, power regulators and all those components in primary power supply circuit.
8/17/2014 3:36:25 AM •
Sony FD...
•
49 views • 0 helpful votes
Picture & Sound wink out for a few swconds every now and then
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "
Mosaic" or "
Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
Do a search by type in the brand name of the device to the search box.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.
6/22/2014 9:09:26 PM •
Sony FD...
•
64 views • 0 helpful votes
Why is my t.v. getting double vision?
Check the cable fitting where it connects to the back of the box, and also at any splitters or unions you may have in the line. Loose fittings can cause that, as can breaks in the coax shielding, and cheap or damaged splitters.
6/20/2014 1:17:39 AM •
Sony FD...
•
51 views • 0 helpful votes
Not finding what you are looking for?