20 Most Recent Janome Memory Craft MC300E Embroidery-Only Machine By The Each - Page 6 Questions & Answers

I also have this model Angela and looking for a manual too though mine has the number 740881. Hopefully someone will come up with something for both of us. I've tried the Janome site and it doesn't have anything for the 694 - maybe it's getting too old like us.

Be sure the needle is fully inserted and secured in the needle holder.

Thread according to machine instructions. Manually rotate handwheel to bring bottom thread to top. There should no interference of the needle and the rotary hook. If you don't fully insert the needle it may strike the hook.

Contact Janome directly to request the manual.

Would recommend taking it for service. Sounds like you may have more than one issue.

Contact Janome directly to inquire.

The foot control may have failed.

Please follow this link :-) Https://www.sewingpartsonline.com/instruction-manual-janome-harmony-1017.aspx

Try contacting Janome to inquire.

It is a good idea to take the bobbin out and turn the hand wheel. Monitor the turning hook that goes around. See if there is threads or fabric stuck. Make sure the hook isn't cocked. The hook goes around in an indented area called the race.Make sure you put one drop of oil on the race.After this turn the hand wheel and try to notice if there is any changes to the resistance. If not you may need to talk with a professional for repair.

Does the light come on? If so, could very well be a computer component that has failed. ...

Likely the total number of needle bar strokes since it was manufactured.

sadly no clue as never knew there was a rewind belt on any sewing machine

Janome would be a possible source.

IF YOU WERE A DEALER OR A REPAIR SSERVICE PROVIDER THEY MIGHT SELL YOU ONE BUT THEY DON'T GIVE THEM TO CONSUMERS

Contact Janome directly to request a manual for model 1722, and to inquire about obtaining a replacement base plate.

Contact Janome directly to request the "guide" for model jd1722.

Force it hard in the direction of travel. You can't break it. Told to me and demonstrated by a dry cleaning shop. The remove the needle and run it flat out for 15 seconds. If it happens again, you need it serviced and timed.

Take a photo or the actual machine to a Janome Dealer and they should be able to point you in the right direction. ...

Just damp oil in each parts of it. Not too much because your garments will be oiled too

If the symbol looks like ] [, then this isn't generally an error message. The machine is in bobbin wind mode. Move the bobbin winder spindle to the left. If the spindle is all the way to the left, then you have a problem with the bobbin winding mechanism below the bobbin winder spindle slot. The sewing machine isn't correctly getting the message of where the spindle is. The Janome 6260 Quilter's Companion manual is available from Janome. The current link is https://www.janome.com/siteassets/support/manuals/retired/computer/inst-book-6260qc.pdf . See page 11 (13 of the PDF). I hope this helps. Cindy Wells