Top 20 Symphonic WF104 Questions & Answers

It looks like there are a range of values that have been quoted online. It would appear to depend on the make of the universal remote. I have found 456 or 458 stated.If you are using a comcast remote I have seen 0675, 10180 or 10171.

Hi there,Firstly, we need to determine if the remote is working correctly:1) remove batteries from remote2) press each button on the remote twice (do this one button at a time). This will discharge any residual current stored in the remote's capacitors.3) insert fresh batteries (ensure these batteries provide good charge)If this does not reset your remote (or still does not work), then suspect your remote is faulty.Please let me know the outcome of the above test.Cheers,

Try this website http://www.xdiv.com/remotes/

Hi, kindly get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__uyhd64

Unfortunately not all dvd players can be unlocked like that. You can try to rip the dvd to your computer and then burn it region free. Just make sure not to violate any copyright laws as that is why the region protection is there in the first place.
Thank you,
Lee

With a DVD you DO NOT select a Channel. Instead you select the AV, Audio Visual input.

0436 worked for me

10180, 10171 those are the symphonic remote codes for comcast.

10463 try using this code

under menu their should be a CA/TV option.

the codes are in the back of the remot manual or try oneforall.com

Did you glance in the manual to see what types of DVD it would play (typ. DVD-9, DVD-4, etc.) and try it?  This site can't prevent you reading appropriate manuals, you know.

I'm guessing you have tried these already, but, you can try:

2017, 2213, 1029, 1134, 1150

if it is the ER1

014, 186

If that doesn't work, try a search by doing this:

Turn on the device.
2. Press and hold SELECT and the appropriate mode key (CBL, TV, VCR, DVD, or
AUX) until the mode keys blink twice. For example, to search for a TV code, press
and hold SELECT and TV at the same time.
Note: If you reassigned mode keys, you may, for example, press SELECT and
VCR to search for a TV code to assign to the VCR mode key.
3. Press 9 9 1. The mode key you selected in step 2 blinks twice.
4. Point the remote toward the device, and press PLAY . The remote automatically tests each code in its library, beginning with the most common codes. The mode key blinks once each time the remote transmits a new code. The mode key
blinks twice when it reaches the last code.
5. As soon as the device powers off, press SELECT.
6. Verify the new code is correct by pressing POWER.
7. Did the device power on again?
• If yes, press SELECT to assign the code.
• If no, complete the following steps:
a) Turn the device on.
b) Press channel up or channel down to step forward or back to the correct code.
c) When the device turns off, press SELECT to assign the code.

1150 worked for me :o)

Try using words to form sentences next time.
Don't lose the remote; tie a scarf on it with a key-finder in it and a pesto or frosting saran pack in the battery compartment if you have to.  You do.
Because now, you get to go buy a universal remote and program it, or use a universal remote program on a PalmPilot, cellphone, or IrDA-equipped PC.

Alternately, you could take advantage of any automatic input priorities the TV set has which are compatible with your game cabling.

0458, 0456, 0040, 0041 try these! Good Luck!

the ticking sound is most likely the laser hitting the disk trying to focus, my guess is the motor isnt spinning the disc or the laser is bad or weak.

I haven't found a way without a remote except to unplug everything except a vcr or dvd, no other channel inputs and run the channel set up function. It will only recognise the one it can read and it will only leave you with the game channel... give it a try.

did you try 3308?